Qt
Internal/Contributor docs for the Qt SDK. <b>Note:</b> These are NOT official API docs; those are found <a href='https://doc.qt.io/'>here</a>.
Loading...
Searching...
No Matches
CapsuleGeometry Member List

This is the complete list of members for CapsuleGeometry, including all inherited members.

addAttribute(Attribute::Semantic semantic, int offset, Attribute::ComponentType componentType)QQuick3DGeometry
addAttribute(const Attribute &att)QQuick3DGeometry
attribute(int index) constQQuick3DGeometry
attributeCount() constQQuick3DGeometry
bindableObjectName()QObject
bindingStorage()QObjectinline
bindingStorage() constQObjectinline
blockSignals(bool b) noexceptQObject
boundsMaxQQuick3DGeometry
boundsMax() constQQuick3DGeometry
boundsMinQQuick3DGeometry
boundsMin() constQQuick3DGeometry
CapsuleGeometry()CapsuleGeometry
childEvent(QChildEvent *event)QObjectprotectedvirtual
children() constQObjectinline
childrenChanged()QQuick3DObjectsignal
classBegin() overrideQQuick3DObjectprotectedvirtual
clear()QQuick3DGeometry
componentComplete() overrideQQuick3DObjectprotectedvirtual
connect(const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection)QObjectstatic
connect(const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)QObjectstatic
connect(const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) constQObjectinline
connect(const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)QObjectinlinestatic
connect(const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)QObjectinlinestatic
connectNotify(const QMetaMethod &signal)QObjectprotectedvirtual
countQQuick3DGeometry
customEvent(QEvent *event)QObjectprotectedvirtual
d_ptrQObjectprotected
dataQQuick3DGeometry
deleteLater()QObjectslot
destroyed(QObject *=nullptr)QObjectsignal
diameterCapsuleGeometry
diameter() constCapsuleGeometryinline
diameterChanged()CapsuleGeometrysignal
disconnect(const QObject *sender, const char *signal, const QObject *receiver, const char *member)QObjectstatic
disconnect(const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member)QObjectstatic
disconnect(const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) constQObjectinline
disconnect(const QObject *receiver, const char *member=nullptr) constQObjectinline
disconnect(const QMetaObject::Connection &)QObjectstatic
disconnect(const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot)QObjectinlinestatic
disconnect(const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero)QObjectinlinestatic
disconnectNotify(const QMetaMethod &signal)QObjectprotectedvirtual
dumpObjectInfo() constQObject
dumpObjectTree() constQObject
dynamicPropertyNames() constQObject
enableNormalsCapsuleGeometry
enableNormals() constCapsuleGeometryinline
enableNormalsChanged()CapsuleGeometrysignal
enableUVCapsuleGeometry
enableUV() constCapsuleGeometryinline
enableUVChanged()CapsuleGeometrysignal
event(QEvent *event)QObjectvirtual
eventFilter(QObject *watched, QEvent *event)QObjectvirtual
findChild(QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) constQObjectinline
findChild(Qt::FindChildOptions options=Qt::FindChildrenRecursively) constQObjectinline
findChildren(QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) constQObjectinline
findChildren(Qt::FindChildOptions options=Qt::FindChildrenRecursively) constQObjectinline
geometryNodeDirty()QQuick3DGeometrysignal
heightCapsuleGeometry
height() constCapsuleGeometryinline
heightChanged()CapsuleGeometrysignal
indexData() constQQuick3DGeometry
inherits(const char *classname) constQObjectinline
installEventFilter(QObject *filterObj)QObject
isComponentComplete() constQQuick3DObjectprotected
isQuickItemType() constQObjectinline
isSignalConnected(const QMetaMethod &signal) constQObjectprotected
isWidgetType() constQObjectinline
isWindowType() constQObjectinline
itemChange(ItemChange, const ItemChangeData &)QQuick3DObjectprotectedvirtual
killTimer(int id)QObject
killTimer(Qt::TimerId id)QObject
latitudesCapsuleGeometry
latitudes() constCapsuleGeometryinline
latitudesChanged()CapsuleGeometrysignal
longitudesCapsuleGeometry
longitudes() constCapsuleGeometryinline
longitudesChanged()CapsuleGeometrysignal
markAllDirty() overrideQQuick3DGeometryprotectedvirtual
moveToThread(QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)QObject
nameQQuick3DGeometry
objectNameQObject
objectName() constQObject
objectNameChanged(const QString &objectName, QPrivateSignal)QObjectsignal
offsetQQuick3DGeometry
parentQQuick3DObject
QObject::parent() constQObjectinline
parentChanged()QQuick3DObjectsignal
preSync()QQuick3DObjectprotectedvirtual
PrimitiveType enum nameQQuick3DGeometry
primitiveType() constQQuick3DGeometry
property(const char *name) constQObject
Q_REVISION(6, 3) int subsetCount() constQQuick3DGeometry
Q_REVISION(6, 3) QVector3D subsetBoundsMin(int subset) constQQuick3DGeometry
Q_REVISION(6, 3) QVector3D subsetBoundsMax(int subset) constQQuick3DGeometry
Q_REVISION(6, 3) int subsetOffset(int subset) constQQuick3DGeometry
Q_REVISION(6, 3) int subsetCount(int subset) constQQuick3DGeometry
Q_REVISION(6, 3) QString subsetName(int subset) constQQuick3DGeometry
Q_REVISION(6, 3) void addSubset(int offsetQQuick3DGeometry
Q_REVISION(6, 6) QByteArray targetData() constQQuick3DGeometry
Q_REVISION(6, 6) void setTargetData(const QByteArray &data)QQuick3DGeometry
Q_REVISION(6, 6) void setTargetData(int offsetQQuick3DGeometry
Q_REVISION(6, 6) TargetAttribute targetAttribute(int index) constQQuick3DGeometry
Q_REVISION(6, 6) int targetAttributeCount() constQQuick3DGeometry
Q_REVISION(6, 6) void addTargetAttribute(quint32 targetIdQQuick3DGeometry
Q_REVISION(6, 6) void addTargetAttribute(const TargetAttribute &att)QQuick3DGeometry
Q_REVISION(6, 7) void geometryChanged()QQuick3DGeometrysignal
qFindChildqFindChildren(const QObject *obj, const QString &name)()QObjectrelated
qFindChildrenqFindChildren(const QObject *obj, const QString &name)()QObjectrelated
QObject(QObject *parent=nullptr)QObjectexplicit
QObject(QObjectPrivate &dd, QObject *parent=nullptr)QObjectprotected
qobject_cast(const QObject *object)QObjectrelated
QObjectListQObjectrelated
QQmlParserStatus()QQmlParserStatus
QQuick3DGeometry(QQuick3DObject *parent=nullptr)QQuick3DGeometryexplicit
QQuick3DObject(QQuick3DObjectPrivate &dd, QQuick3DObject *parent=nullptr)QQuick3DObjectexplicitprotected
receivers(const char *signal) constQObjectprotected
removeEventFilter(QObject *obj)QObject
ringsCapsuleGeometry
rings() constCapsuleGeometryinline
ringsChanged()CapsuleGeometrysignal
semanticQQuick3DGeometry
sender() constQObjectprotected
senderSignalIndex() constQObjectprotected
setBounds(const QVector3D &min, const QVector3D &max)QQuick3DGeometry
setDiameter(float diameter)CapsuleGeometry
setEnableNormals(bool enable)CapsuleGeometry
setEnableUV(bool enable)CapsuleGeometry
setHeight(float height)CapsuleGeometry
setIndexData(const QByteArray &data)QQuick3DGeometry
setIndexData(int offset, const QByteArray &data)QQuick3DGeometry
setLatitudes(int latitudes)CapsuleGeometry
setLongitudes(int longitudes)CapsuleGeometry
setObjectName(const QString &name)QObjectinline
setObjectName(QAnyStringView name)QObject
setParent(QObject *parent)QObject
setParentItem(QQuick3DObject *parentItem)QQuick3DObjectslot
setPrimitiveType(PrimitiveType type)QQuick3DGeometry
setProperty(const char *name, const QVariant &value)QObject
setProperty(const char *name, QVariant &&value)QObjectinline
setRings(int rings)CapsuleGeometry
setStride(int stride)QQuick3DGeometry
setVertexData(const QByteArray &data)QQuick3DGeometry
setVertexData(int offset, const QByteArray &data)QQuick3DGeometry
signalsBlocked() const noexceptQObjectinline
startTimer(int interval, Qt::TimerType timerType=Qt::CoarseTimer)QObject
startTimer(std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)QObject
stateChanged()QQuick3DObjectsignal
strideQQuick3DGeometry
stride() constQQuick3DGeometry
thread() constQObject
timerEvent(QTimerEvent *event)QObjectprotectedvirtual
update()QQuick3DObjectslot
updateSpatialNode(QSSGRenderGraphObject *node) overrideQQuick3DGeometryprotectedvirtual
vertexData() constQQuick3DGeometry
~QObject()QObjectvirtual
~QQmlParserStatus()QQmlParserStatusvirtual
~QQuick3DGeometry() overrideQQuick3DGeometry