\inmodule QtLocation More...

#include <qgeocodereply.h>

Inheritance diagram for QGeoCodeReply:

Collaboration diagram for QGeoCodeReply:

Public Types
enum	Error { NoError , EngineNotSetError , CommunicationError , ParseError , UnsupportedOptionError , CombinationError , UnknownError }
	Describes an error which prevented the completion of the operation. More...

Signals
void	finished ()
	This signal is emitted when this reply has finished processing.

void	aborted ()

void	errorOccurred (QGeoCodeReply::Error error, const QString &errorString=QString())
	This signal is emitted when an error has been detected in the processing of this reply.

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QGeoCodeReply (Error error, const QString &errorString, QObject *parent=nullptr)
	Constructs a geocode reply with a given error and errorString and the specified parent.

virtual	~QGeoCodeReply ()
	Destroys this reply object.

bool	isFinished () const
	Return true if the operation completed successfully or encountered an error which cause the operation to come to a halt.

Error	error () const
	Returns the error state of this reply.

QString	errorString () const
	Returns the textual representation of the error state of this reply.

QGeoShape	viewport () const
	Returns the viewport which contains the results.

QList< QGeoLocation >	locations () const
	Returns a list of locations.

qsizetype	limit () const
	Returns the limit on the number of responses from each data source.

qsizetype	offset () const
	Returns the offset into the entire result set at which to start fetching results.

virtual void	abort ()
	Cancels the operation immediately.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Protected Member Functions
	QGeoCodeReply (QObject *parent=nullptr)
	Constructs a geocode reply with the specified parent.

void	setError (Error error, const QString &errorString)
	Sets the error state of this reply to error and the textual representation of the error to errorString.

void	setFinished (bool finished)
	Sets whether or not this reply has finished to finished.

void	setViewport (const QGeoShape &viewport)
	Sets the viewport which contains the results to viewport.

void	addLocation (const QGeoLocation &location)
	Adds location to the list of locations in this reply.

void	setLocations (const QList< QGeoLocation > &locations)
	Sets the list of locations in the reply.

void	setLimit (qsizetype limit)
	Sets the limit on the number of responses from each data source to limit.

void	setOffset (qsizetype offset)
	Sets the offset in the entire result set at which to start fetching result to offset.

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Friends
class	QGeoCodeReplyPrivate

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Properties inherited from QObject
QString	objectName
	the name of this object

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

\inmodule QtLocation

Since: 5.6

The QGeoCodeReply class manages an operation started by an instance of QGeoCodingManager.

Instances of QGeoCodeReply manage the state and results of these operations.

The isFinished(), error() and errorString() methods provide information on whether the operation has completed and if it completed successfully.

The finished() and errorOccurred(QGeoCodeReply::Error,QString) signals can be used to monitor the progress of the operation.

It is possible that a newly created QGeoCodeReply may be in a finished state, most commonly because an error has occurred. Since such an instance will never emit the finished() or errorOccurred(QGeoCodeReply::Error,QString) signals, it is important to check the result of isFinished() before making the connections to the signals. The documentation for QGeoCodingManager demonstrates how this might be carried out.

If the operation completes successfully the results will be able to be accessed with locations().

Definition at line 17 of file qgeocodereply.h.

Member Enumeration Documentation

◆ Error

enum QGeoCodeReply::Error

Describes an error which prevented the completion of the operation.

\value NoError No error has occurred. \value EngineNotSetError The geocoding manager that was used did not have a QGeoCodingManagerEngine instance associated with it. \value CommunicationError An error occurred while communicating with the service provider. \value ParseError The response from the service provider was in an unrecognizable format. \value UnsupportedOptionError The requested operation or one of the options for the operation are not supported by the service provider. \value CombinationError An error occurred while results where being combined from multiple sources. \value UnknownError An error occurred which does not fit into any of the other categories.

Enumerator
NoError
EngineNotSetError
CommunicationError
ParseError
UnsupportedOptionError
CombinationError
UnknownError

Definition at line 22 of file qgeocodereply.h.

Constructor & Destructor Documentation

◆ QGeoCodeReply() [1/2]

QGeoCodeReply::QGeoCodeReply	(	Error	error,
		const QString &	errorString,
		QObject *	parent = nullptr )

explicit

Constructs a geocode reply with a given error and errorString and the specified parent.

Definition at line 73 of file qgeocodereply.cpp.

◆ ~QGeoCodeReply()

QGeoCodeReply::~QGeoCodeReply ( )

virtual

Destroys this reply object.

Definition at line 81 of file qgeocodereply.cpp.

◆ QGeoCodeReply() [2/2]

QGeoCodeReply::QGeoCodeReply ( QObject * parent = nullptr )

explicitprotected

Constructs a geocode reply with the specified parent.

Definition at line 66 of file qgeocodereply.cpp.

Member Function Documentation

◆ abort()

void QGeoCodeReply::abort ( )

virtual

Cancels the operation immediately.

This will do nothing if the reply is finished.

See also: aborted()

Definition at line 214 of file qgeocodereply.cpp.

◆ aborted

void QGeoCodeReply::aborted ( )

signal

Since: 5.9

This signal is emitted when the operation has been cancelled.

See also: abort()

◆ addLocation()

void QGeoCodeReply::addLocation ( const QGeoLocation & location )

protected

Adds location to the list of locations in this reply.

Definition at line 185 of file qgeocodereply.cpp.

◆ error()

QGeoCodeReply::Error QGeoCodeReply::error ( ) const

Returns the error state of this reply.

If the result is QGeoCodeReply::NoError then no error has occurred.

Definition at line 132 of file qgeocodereply.cpp.

◆ errorOccurred

void QGeoCodeReply::errorOccurred	(	QGeoCodeReply::Error	error,
		const QString &	errorString = QString() )

signal

This signal is emitted when an error has been detected in the processing of this reply.

The finished() signal will probably follow.

The error will be described by the error code error. If errorString is not empty it will contain a textual description of the error.

This signal and QGeoCodingManager::errorOccurred() will be emitted at the same time.

Note: Do not delete this reply object in the slot connected to this signal. Use deleteLater() instead.

◆ errorString()

QString QGeoCodeReply::errorString ( ) const

Returns the textual representation of the error state of this reply.

If no error has occurred this will return an empty string. It is possible that an error occurred which has no associated textual representation, in which case this will also return an empty string.

To determine whether an error has occurred, check to see if QGeoCodeReply::error() is equal to QGeoCodeReply::NoError.

Definition at line 147 of file qgeocodereply.cpp.

◆ finished

void QGeoCodeReply::finished ( )

signal

This signal is emitted when this reply has finished processing.

If error() equals QGeoCodeReply::NoError then the processing finished successfully.

This signal and QGeoCodingManager::finished() will be emitted at the same time.

Note: Do not delete this reply object in the slot connected to this signal. Use deleteLater() instead.

◆ isFinished()

bool QGeoCodeReply::isFinished ( ) const

Return true if the operation completed successfully or encountered an error which cause the operation to come to a halt.

Definition at line 107 of file qgeocodereply.cpp.

◆ limit()

qsizetype QGeoCodeReply::limit ( ) const

Returns the limit on the number of responses from each data source.

If no limit was set this function will return -1.

This may be more than locations().length() if the number of responses was less than the number requested.

Definition at line 229 of file qgeocodereply.cpp.

◆ locations()

QList< QGeoLocation > QGeoCodeReply::locations ( ) const

Returns a list of locations.

The locations are the results of the operation corresponding to the QGeoCodingManager function which created this reply.

Definition at line 177 of file qgeocodereply.cpp.

◆ offset()

qsizetype QGeoCodeReply::offset ( ) const

Returns the offset into the entire result set at which to start fetching results.

Definition at line 238 of file qgeocodereply.cpp.

Referenced by testing.tools.fixup_pdf_template.TemplateProcessor::insert_xref_entry(), and testing.tools.fixup_pdf_template.TemplateProcessor::process_line().

Here is the caller graph for this function:

◆ setError()

void QGeoCodeReply::setError	(	QGeoCodeReply::Error	error,
		const QString &	errorString )

protected

Sets the error state of this reply to error and the textual representation of the error to errorString.

This will also cause errorOccurred() and finished() signals to be emitted, in that order.

Definition at line 119 of file qgeocodereply.cpp.

◆ setFinished()

void QGeoCodeReply::setFinished ( bool finished )

protected

Sets whether or not this reply has finished to finished.

If finished is true, this will cause the finished() signal to be emitted.

If the operation completed successfully, QGeoCodeReply::setLocations() should be called before this function. If an error occurred, QGeoCodeReply::setError() should be used instead.

Definition at line 96 of file qgeocodereply.cpp.

◆ setLimit()

void QGeoCodeReply::setLimit ( qsizetype limit )

protected

Sets the limit on the number of responses from each data source to limit.

If limit is -1 then all available responses will be returned.

Definition at line 248 of file qgeocodereply.cpp.

◆ setLocations()

void QGeoCodeReply::setLocations ( const QList< QGeoLocation > & locations )

protected

Sets the list of locations in the reply.

Definition at line 193 of file qgeocodereply.cpp.

◆ setOffset()

void QGeoCodeReply::setOffset ( qsizetype offset )

protected

Sets the offset in the entire result set at which to start fetching result to offset.

Definition at line 257 of file qgeocodereply.cpp.

◆ setViewport()

void QGeoCodeReply::setViewport ( const QGeoShape & viewport )

protected

Sets the viewport which contains the results to viewport.

Definition at line 155 of file qgeocodereply.cpp.

◆ viewport()

QGeoShape QGeoCodeReply::viewport ( ) const

Returns the viewport which contains the results.

This function will return \nullptr if no viewport bias was specified in the QGeoCodingManager function which created this reply.

Definition at line 166 of file qgeocodereply.cpp.

Friends And Related Symbol Documentation

◆ QGeoCodeReplyPrivate

friend class QGeoCodeReplyPrivate

friend

Definition at line 68 of file qgeocodereply.h.

The documentation for this class was generated from the following files:

qtlocation/src/location/maps/qgeocodereply.h (cd4db512ae08836f5fa1d746000052215cf70a9c)
qtlocation/src/location/maps/qgeocodereply.cpp (cd4db512ae08836f5fa1d746000052215cf70a9c)

Public Types

Signals

Public Member Functions

Protected Member Functions

Friends

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Error

Constructor & Destructor Documentation

◆ QGeoCodeReply() [1/2]

◆ ~QGeoCodeReply()

◆ QGeoCodeReply() [2/2]

Member Function Documentation

◆ abort()

◆ aborted

◆ addLocation()

◆ error()

◆ errorOccurred

◆ errorString()

◆ finished

◆ isFinished()

◆ limit()

◆ locations()

◆ offset()

◆ setError()

◆ setFinished()

◆ setLimit()

◆ setLocations()

◆ setOffset()

◆ setViewport()

◆ viewport()

Friends And Related Symbol Documentation

◆ QGeoCodeReplyPrivate