\inmodule QtLocation More...

#include <qgeoroutingmanager.h>

Inheritance diagram for QGeoRoutingManager:

Collaboration diagram for QGeoRoutingManager:

Signals
void	finished (QGeoRouteReply *reply)
	This signal is emitted when reply has finished processing.

void	errorOccurred (QGeoRouteReply *reply, QGeoRouteReply::Error error, const QString &errorString=QString())
	This signal is emitted when an error has been detected in the processing of reply.

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	~QGeoRoutingManager ()
	Destroys this manager.

QString	managerName () const
	Returns the name of the engine which implements the behaviour of this routing manager.

int	managerVersion () const
	Returns the version of the engine which implements the behaviour of this routin manager.

QGeoRouteReply *	calculateRoute (const QGeoRouteRequest &request)
	Begins the calculation of the route specified by request.

QGeoRouteReply *	updateRoute (const QGeoRoute &route, const QGeoCoordinate &position)
	Begins the process of updating route based on the current position position.

QGeoRouteRequest::TravelModes	supportedTravelModes () const
	Returns the travel modes supported by this manager.

QGeoRouteRequest::FeatureTypes	supportedFeatureTypes () const
	Returns the types of features that this manager can take into account during route planning.

QGeoRouteRequest::FeatureWeights	supportedFeatureWeights () const
	Returns the weightings which this manager can apply to different features during route planning.

QGeoRouteRequest::RouteOptimizations	supportedRouteOptimizations () const
	Returns the route optimizations supported by this manager.

QGeoRouteRequest::SegmentDetails	supportedSegmentDetails () const
	Returns the levels of detail for routing segments which can be requested with this manager.

QGeoRouteRequest::ManeuverDetails	supportedManeuverDetails () const
	Returns the levels of detail for navigation maneuvers which can be requested by this manager.

void	setLocale (const QLocale &locale)
	Sets the locale to be used by this manager to locale.

QLocale	locale () const
	Returns the locale used to hint to this routing manager about what language to use for addresses and instructions.

void	setMeasurementSystem (QLocale::MeasurementSystem system)
	Sets the measurement system used by this manager to system.

QLocale::MeasurementSystem	measurementSystem () const
	Returns the measurement system used by this manager.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Friends
class	QGeoServiceProvider

class	QGeoServiceProviderPrivate

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Properties inherited from QObject
QString	objectName
	the name of this object

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

\inmodule QtLocation

Since: 5.6

The QGeoRoutingManager class provides support for geographic routing operations.

The calculateRoute() and updateRoute() methods function QGeoRouteReply objects, which manage these operations and report on the result of the operations and any errors which may have occurred.

The calculateRoute() function is used to find a route (or routes) that follows a set of waypoints and matches various other criteria. The QGeoRouteRequest class is used to specify this information.

If supportsRouteUpdates() returns true then the QGeoRoutingManager supports updating route information based on position updates. This will cause the travel time and distance estimates to be updated, and any QGeoRouteSegments already traversed to be removed from the route.

The updates can be triggered with the updateRoute() function, which makes use of the QGeoPositionInfo instances emitted as position updates by QGeoPositionInfoSource.

Instances of QGeoRoutingManager can be accessed with QGeoServiceProvider::routingManager().

A small example of the usage of QGeoRoutingManager and QGeoRouteRequests follows:

Definition at line 17 of file qgeoroutingmanager.h.

Constructor & Destructor Documentation

◆ ~QGeoRoutingManager()

QGeoRoutingManager::~QGeoRoutingManager ( )

Destroys this manager.

Definition at line 75 of file qgeoroutingmanager.cpp.

Member Function Documentation

◆ calculateRoute()

QGeoRouteReply * QGeoRoutingManager::calculateRoute ( const QGeoRouteRequest & request )

Begins the calculation of the route specified by request.

A QGeoRouteReply object will be returned, which can be used to manage the routing operation and to return the results of the operation.

This manager and the returned QGeoRouteReply object will emit signals indicating if the operation completes or if errors occur.

Once the operation has completed, QGeoRouteReply::routes can be used to retrieve the calculated route or routes.

If request includes features which are not supported by this manager, as reported by the methods in this manager, then a QGeoRouteReply::UnsupportedOptionError will occur.

The user is responsible for deleting the returned reply object, although this can be done in the slot connected to QGeoRoutingManager::finished(), QGeoRoutingManager::errorOccurred(), QGeoRouteReply::finished() or QGeoRouteReply::errorOccurred() with deleteLater().

Definition at line 125 of file qgeoroutingmanager.cpp.

◆ errorOccurred

void QGeoRoutingManager::errorOccurred	(	QGeoRouteReply *	reply,
		QGeoRouteReply::Error	error,
		const QString &	errorString = QString() )

signal

This signal is emitted when an error has been detected in the processing of reply.

The QGeoRoutingManager::finished() signal will probably follow.

The error will be described by the error code error. If errorString is not empty it will contain a textual description of the error.

This signal and QGeoRouteReply::errorOccurred() will be emitted at the same time.

Note: Do not delete the reply object in the slot connected to this signal. Use deleteLater() instead.

◆ finished

void QGeoRoutingManager::finished ( QGeoRouteReply * reply )

signal

This signal is emitted when reply has finished processing.

If reply::error() equals QGeoRouteReply::NoError then the processing finished successfully.

This signal and QGeoRouteReply::finished() will be emitted at the same time.

Note: Do not delete the reply object in the slot connected to this signal. Use deleteLater() instead.

◆ locale()

QLocale QGeoRoutingManager::locale ( ) const

Returns the locale used to hint to this routing manager about what language to use for addresses and instructions.

Definition at line 231 of file qgeoroutingmanager.cpp.

◆ managerName()

QString QGeoRoutingManager::managerName ( ) const

Returns the name of the engine which implements the behaviour of this routing manager.

The combination of managerName() and managerVersion() should be unique amongst the plugin implementations.

Definition at line 87 of file qgeoroutingmanager.cpp.

◆ managerVersion()

int QGeoRoutingManager::managerVersion ( ) const

Returns the version of the engine which implements the behaviour of this routin manager.

The combination of managerName() and managerVersion() should be unique amongst the plugin implementations.

Definition at line 99 of file qgeoroutingmanager.cpp.

◆ measurementSystem()

QLocale::MeasurementSystem QGeoRoutingManager::measurementSystem ( ) const

Returns the measurement system used by this manager.

If setMeasurementSystem() has been called then the value returned by this function may be different to that returned by locale().\l {QLocale::measurementSystem()}{measurementSystem()}. In which case the value returned by this function is what will be used by the manager.

See also: setMeasurementSystem(), setLocale()

Definition at line 258 of file qgeoroutingmanager.cpp.

◆ setLocale()

void QGeoRoutingManager::setLocale ( const QLocale & locale )

Sets the locale to be used by this manager to locale.

If this routing manager supports returning addresses and instructions in different languages, they will be returned in the language of locale.

The locale used defaults to the system locale if this is not set.

Definition at line 222 of file qgeoroutingmanager.cpp.

◆ setMeasurementSystem()

void QGeoRoutingManager::setMeasurementSystem ( QLocale::MeasurementSystem system )

Sets the measurement system used by this manager to system.

The measurement system can be set independently of the locale. Both setLocale() and this function set the measurement system. The value set by the last function called will be used.

See also: measurementSystem(), locale(), setLocale()

Definition at line 244 of file qgeoroutingmanager.cpp.

◆ supportedFeatureTypes()

QGeoRouteRequest::FeatureTypes QGeoRoutingManager::supportedFeatureTypes ( ) const

Returns the types of features that this manager can take into account during route planning.

Definition at line 174 of file qgeoroutingmanager.cpp.

◆ supportedFeatureWeights()

QGeoRouteRequest::FeatureWeights QGeoRoutingManager::supportedFeatureWeights ( ) const

Returns the weightings which this manager can apply to different features during route planning.

Definition at line 183 of file qgeoroutingmanager.cpp.

◆ supportedManeuverDetails()

QGeoRouteRequest::ManeuverDetails QGeoRoutingManager::supportedManeuverDetails ( ) const

Returns the levels of detail for navigation maneuvers which can be requested by this manager.

Definition at line 209 of file qgeoroutingmanager.cpp.

◆ supportedRouteOptimizations()

QGeoRouteRequest::RouteOptimizations QGeoRoutingManager::supportedRouteOptimizations ( ) const

Returns the route optimizations supported by this manager.

Definition at line 191 of file qgeoroutingmanager.cpp.

◆ supportedSegmentDetails()

QGeoRouteRequest::SegmentDetails QGeoRoutingManager::supportedSegmentDetails ( ) const

Returns the levels of detail for routing segments which can be requested with this manager.

Definition at line 200 of file qgeoroutingmanager.cpp.

◆ supportedTravelModes()

QGeoRouteRequest::TravelModes QGeoRoutingManager::supportedTravelModes ( ) const

Returns the travel modes supported by this manager.

Definition at line 165 of file qgeoroutingmanager.cpp.

◆ updateRoute()

QGeoRouteReply * QGeoRoutingManager::updateRoute	(	const QGeoRoute &	route,
		const QGeoCoordinate &	position )

Begins the process of updating route based on the current position position.

A QGeoRouteReply object will be returned, which can be used to manage the routing operation and to return the results of the operation.

This manager and the returned QGeoRouteReply object will emit signals indicating if the operation completes or if errors occur.

If supportsRouteUpdates() returns false an QGeoRouteReply::UnsupportedOptionError will occur.

Once the operation has completed, QGeoRouteReply::routes can be used to retrieve the updated route.

The returned route could be entirely different to the original route, especially if position is far away from the initial route. Otherwise the route will be similar, although the remaining time and distance will be updated and any segments of the original route which have been traversed will be removed.

The user is responsible for deleting the returned reply object, although this can be done in the slot connected to QGeoRoutingManager::finished(), QGeoRoutingManager::errorOccurred(), QGeoRouteReply::finished() or QGeoRouteReply::errorOccurred() with deleteLater().

Definition at line 157 of file qgeoroutingmanager.cpp.

Friends And Related Symbol Documentation

◆ QGeoServiceProvider

friend class QGeoServiceProvider

friend

Definition at line 53 of file qgeoroutingmanager.h.

◆ QGeoServiceProviderPrivate

friend class QGeoServiceProviderPrivate