|
| | QWaylandTabletToolV2 (QWaylandTabletSeatV2 *tabletSeat, ::zwp_tablet_tool_v2 *tool) |
| |
| | ~QWaylandTabletToolV2 () |
| |
| void | updateCursor () |
| |
| | QPointingDevice (QObject *parent=nullptr) |
| | Creates a new invalid pointing device instance as a child of parent.
|
| |
| | ~QPointingDevice () |
| |
| | QPointingDevice (const QString &name, qint64 systemId, QInputDevice::DeviceType devType, PointerType pType, Capabilities caps, int maxPoints, int buttonCount, const QString &seatName=QString(), QPointingDeviceUniqueId uniqueId=QPointingDeviceUniqueId(), QObject *parent=nullptr) |
| | Creates a new pointing device instance with the given name, deviceType, pointerType, capabilities, maxPoints, buttonCount, seatName, uniqueId and parent.
|
| |
| PointerType | pointerType () const |
| | Returns the pointer type.
|
| |
| int | maximumPoints () const |
| | Returns the maximum number of simultaneous touch points (fingers) that can be detected.
|
| |
| int | buttonCount () const |
| | Returns the maximum number of on-device buttons that can be detected.
|
| |
| QPointingDeviceUniqueId | uniqueId () const |
| | Returns a unique ID (of dubious utility) for the device.
|
| |
| bool | operator== (const QPointingDevice &other) const |
| |
| | QInputDevice (QObject *parent=nullptr) |
| | Creates a new invalid input device instance as a child of parent.
|
| |
| | ~QInputDevice () |
| |
| | QInputDevice (const QString &name, qint64 systemId, DeviceType type, const QString &seatName=QString(), QObject *parent=nullptr) |
| | Creates a new input device instance.
|
| |
| QString | name () const |
| | Returns the device name.
|
| |
| DeviceType | type () const |
| | Returns the device type.
|
| |
| Capabilities | capabilities () const |
| | Returns the device capabilities.
|
| |
| bool | hasCapability (Capability cap) const |
| | Returns whether the device capabilities include the given capability.
|
| |
| qint64 | systemId () const |
| | Returns the platform specific system ID (for example xinput ID on the X11 platform).
|
| |
| QString | seatName () const |
| | Returns the seat with which the device is associated, if known; otherwise empty.
|
| |
| QRect | availableVirtualGeometry () const |
| | Returns the region within the \l{QScreen::availableVirtualGeometry}{virtual desktop} that this device can access.
|
| |
| bool | operator== (const QInputDevice &other) const |
| |
| Q_INVOKABLE | QObject (QObject *parent=nullptr) |
| | Constructs an object with parent object parent.
|
| |
| virtual | ~QObject () |
| | Destroys the object, deleting all its child objects.
|
| |
| virtual bool | event (QEvent *event) |
| | This virtual function receives events to an object and should return true if the event e was recognized and processed.
|
| |
| virtual bool | eventFilter (QObject *watched, QEvent *event) |
| | Filters events if this object has been installed as an event filter for the watched object.
|
| |
| QString | objectName () const |
| |
| Q_WEAK_OVERLOAD void | setObjectName (const QString &name) |
| | Sets the object's name to name.
|
| |
| void | setObjectName (QAnyStringView name) |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| QBindable< QString > | bindableObjectName () |
| |
| bool | isWidgetType () const |
| | Returns true if the object is a widget; otherwise returns false.
|
| |
| bool | isWindowType () const |
| | Returns true if the object is a window; otherwise returns false.
|
| |
| bool | isQuickItemType () const |
| | Returns true if the object is a QQuickItem; otherwise returns false.
|
| |
| bool | signalsBlocked () const noexcept |
| | Returns true if signals are blocked; otherwise returns false.
|
| |
| bool | blockSignals (bool b) noexcept |
| | If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
|
| |
| QThread * | thread () const |
| | Returns the thread in which the object lives.
|
| |
| bool | moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL) |
| | Changes the thread affinity for this object and its children and returns true on success.
|
| |
| int | startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer) |
| | This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
|
| |
| int | startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer) |
| |
| void | killTimer (int id) |
| | Kills the timer with timer identifier, id.
|
| |
| void | killTimer (Qt::TimerId id) |
| |
| template<typename T> |
| T | findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
|
| |
| template<typename T> |
| QList< T > | findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
|
| |
| template<typename T> |
| T | findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| template<typename T> |
| QList< T > | findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| const QObjectList & | children () const |
| | Returns a list of child objects.
|
| |
| void | setParent (QObject *parent) |
| | Makes the object a child of parent.
|
| |
| void | installEventFilter (QObject *filterObj) |
| | Installs an event filter filterObj on this object.
|
| |
| void | removeEventFilter (QObject *obj) |
| | Removes an event filter object obj from this object.
|
| |
| QMetaObject::Connection | connect (const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const |
| |
| bool | disconnect (const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) const |
| |
| bool | disconnect (const QObject *receiver, const char *member=nullptr) const |
| |
| void | dumpObjectTree () const |
| | Dumps a tree of children to the debug output.
|
| |
| void | dumpObjectInfo () const |
| | Dumps information about signal connections, etc.
|
| |
| bool | setProperty (const char *name, const QVariant &value) |
| | Sets the value of the object's name property to value.
|
| |
| bool | setProperty (const char *name, QVariant &&value) |
| |
| QVariant | property (const char *name) const |
| | Returns the value of the object's name property.
|
| |
| QList< QByteArray > | dynamicPropertyNames () const |
| |
| QBindingStorage * | bindingStorage () |
| |
| const QBindingStorage * | bindingStorage () const |
| |
| QObject * | parent () const |
| | Returns a pointer to the parent object.
|
| |
| bool | inherits (const char *classname) const |
| | Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
|
| |
|
| void | zwp_tablet_tool_v2_type (uint32_t tool_type) override |
| |
| void | zwp_tablet_tool_v2_hardware_serial (uint32_t hardware_serial_hi, uint32_t hardware_serial_lo) override |
| |
| void | zwp_tablet_tool_v2_hardware_id_wacom (uint32_t hardware_id_hi, uint32_t hardware_id_lo) override |
| |
| void | zwp_tablet_tool_v2_capability (uint32_t capability) override |
| |
| void | zwp_tablet_tool_v2_done () override |
| |
| void | zwp_tablet_tool_v2_removed () override |
| |
| void | zwp_tablet_tool_v2_proximity_in (uint32_t serial, struct ::zwp_tablet_v2 *tablet, struct ::wl_surface *surface) override |
| |
| void | zwp_tablet_tool_v2_proximity_out () override |
| |
| void | zwp_tablet_tool_v2_down (uint32_t serial) override |
| |
| void | zwp_tablet_tool_v2_up () override |
| |
| void | zwp_tablet_tool_v2_motion (wl_fixed_t x, wl_fixed_t y) override |
| |
| void | zwp_tablet_tool_v2_pressure (uint32_t pressure) override |
| |
| void | zwp_tablet_tool_v2_distance (uint32_t distance) override |
| |
| void | zwp_tablet_tool_v2_tilt (wl_fixed_t tilt_x, wl_fixed_t tilt_y) override |
| |
| void | zwp_tablet_tool_v2_rotation (wl_fixed_t degrees) override |
| |
| void | zwp_tablet_tool_v2_slider (int32_t position) override |
| |
| void | zwp_tablet_tool_v2_button (uint32_t serial, uint32_t button, uint32_t state) override |
| |
| void | zwp_tablet_tool_v2_frame (uint32_t time) override |
| |
| | QPointingDevice (QPointingDevicePrivate &d, QObject *parent) |
| |
| | QInputDevice (QInputDevicePrivate &d, QObject *parent) |
| |
| QObject * | sender () const |
| | Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.
|
| |
| int | senderSignalIndex () const |
| |
| int | receivers (const char *signal) const |
| | Returns the number of receivers connected to the signal.
|
| |
| bool | isSignalConnected (const QMetaMethod &signal) const |
| |
| virtual void | timerEvent (QTimerEvent *event) |
| | This event handler can be reimplemented in a subclass to receive timer events for the object.
|
| |
| virtual void | childEvent (QChildEvent *event) |
| | This event handler can be reimplemented in a subclass to receive child events.
|
| |
| virtual void | customEvent (QEvent *event) |
| | This event handler can be reimplemented in a subclass to receive custom events.
|
| |
| virtual void | connectNotify (const QMetaMethod &signal) |
| |
| virtual void | disconnectNotify (const QMetaMethod &signal) |
| |
| | QObject (QObjectPrivate &dd, QObject *parent=nullptr) |
| |
|
| enum class | PointerType {
Unknown = 0
, Generic = 0x0001
, Finger = 0x0002
, Pen = 0x0004
,
Eraser = 0x0008
, Cursor = 0x0010
, AllPointerTypes = 0x7FFF
} |
| | This enum represents what is interacting with the pointing device. More...
|
| |
| enum | GrabTransition {
GrabPassive = 0x01
, UngrabPassive = 0x02
, CancelGrabPassive = 0x03
, OverrideGrabPassive = 0x04
,
GrabExclusive = 0x10
, UngrabExclusive = 0x20
, CancelGrabExclusive = 0x30
} |
| | This enum represents a transition of exclusive or passive grab from one object (possibly nullptr) to another (possibly nullptr). More...
|
| |
| enum class | DeviceType {
Unknown = 0x0000
, Mouse = 0x0001
, TouchScreen = 0x0002
, TouchPad = 0x0004
,
Puck = 0x0008
, Stylus = 0x0010
, Airbrush = 0x0020
, Keyboard = 0x1000
,
AllDevices = 0x7FFFFFFF
} |
| | This enum represents the type of device that generated a QPointerEvent. More...
|
| |
| enum class | Capability {
None = 0
, Position = 0x0001
, Area = 0x0002
, Pressure = 0x0004
,
Velocity = 0x0008
, NormalizedPosition = 0x0020
, MouseEmulation = 0x0040
, PixelScroll = 0x0080
,
Scroll = 0x0100
, Hover = 0x0200
, Rotation = 0x0400
, XTilt = 0x0800
,
YTilt = 0x1000
, TangentialPressure = 0x2000
, ZPosition = 0x4000
, All = 0x7FFFFFFF
} |
| | Indicates what kind of information the input device or its driver can provide. More...
|
| |
| void | deleteLater () |
| | \threadsafe
|
| |
| void | grabChanged (QObject *grabber, QPointingDevice::GrabTransition transition, const QPointerEvent *event, const QEventPoint &point) |
| | This signal is emitted when the grabber object gains or loses an exclusive or passive grab of point during delivery of event.
|
| |
| void | availableVirtualGeometryChanged (QRect area) |
| |
| | Q_REVISION (6, 9) void capabilitiesChanged(Capabilities capabilities) |
| |
| void | destroyed (QObject *=nullptr) |
| | This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.
|
| |
| void | objectNameChanged (const QString &objectName, QPrivateSignal) |
| | This signal is emitted after the object's name has been changed.
|
| |
| static const QPointingDevice * | primaryPointingDevice (const QString &seatName=QString()) |
| | Returns the primary pointing device (the core pointer, traditionally assumed to be a mouse) on the given seat seatName.
|
| |
| static QStringList | seatNames () |
| |
| static QList< const QInputDevice * > | devices () |
| | Returns a list of all registered input devices (keyboards and pointing devices).
|
| |
| static const QInputDevice * | primaryKeyboard (const QString &seatName=QString()) |
| | Returns the core or master keyboard on the given seat seatName.
|
| |
| static QMetaObject::Connection | connect (const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection) |
| | \threadsafe
|
| |
| static QMetaObject::Connection | connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection) |
| |
| template<typename Func1, typename Func2> |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection) |
| |
| template<typename Func1, typename Func2> |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot) |
| |
| static bool | disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *member) |
| | \threadsafe
|
| |
| static bool | disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member) |
| |
| static bool | disconnect (const QMetaObject::Connection &) |
| | Disconnect a connection.
|
| |
| template<typename Func1, typename Func2> |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot) |
| |
| template<typename Func1> |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero) |
| |
| QScopedPointer< QObjectData > | d_ptr |
| |
| PointerType | pointerType |
| |
| int | maximumPoints |
| |
| int | buttonCount |
| |
| QPointingDeviceUniqueId | uniqueId |
| |
| QString | name |
| |
| DeviceType | type |
| |
| Capabilities | capabilities |
| |
| qint64 | systemId |
| |
| QString | seatName |
| |
| QRect | availableVirtualGeometry |
| |
| QString | objectName |
| | the name of this object
|
| |
| template< class T > T | qobject_cast (const QObject *object) |
| | Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.
|
| |
| template< typename T > T | qFindChildqFindChildren (const QObject *obj, const QString &name)() |
| |
| template< typename T > QList< T > | qFindChildrenqFindChildren (const QObject *obj, const QString &name)() |
| |
| | QObjectList |
| | \macro Q_CLASSINFO(Name, Value)
|
| |
Definition at line 97 of file qwaylandtabletv2_p.h.
Inheritance diagram for QtWaylandClient::QWaylandTabletToolV2:
1.13.2