 |
Qt
Internal/Contributor docs for the Qt SDK. Note: These are NOT official API docs; those are found at https://doc.qt.io/
|
|
Qt
Internal/Contributor docs for the Qt SDK. Note: These are NOT official API docs; those are found at https://doc.qt.io/
|
#include <qcapsulegeometry_p.h>
Signals | |
| void | enableNormalsChanged () |
| void | enableUVChanged () |
| void | longitudesChanged () |
| void | latitudesChanged () |
| void | ringsChanged () |
| void | heightChanged () |
| void | diameterChanged () |
| Signals inherited from QQuick3DGeometry | |
| void | geometryNodeDirty () |
| Q_REVISION (6, 7) void geometryChanged() | |
| Signals inherited from QQuick3DObject | |
| void | parentChanged () |
| void | childrenChanged () |
| void | stateChanged () |
| Signals inherited from QObject | |
| void | destroyed (QObject *=nullptr) |
| This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked. | |
| void | objectNameChanged (const QString &objectName, QPrivateSignal) |
| This signal is emitted after the object's name has been changed. | |
Public Member Functions | |
| CapsuleGeometryPhysics () | |
| \qmltype CapsuleGeometry \inqmlmodule QtQuick3D.Physics.Helpers \inherits Geometry | |
| bool | enableNormals () const |
| void | setEnableNormals (bool enable) |
| bool | enableUV () const |
| void | setEnableUV (bool enable) |
| int | longitudes () const |
| void | setLongitudes (int longitudes) |
| int | latitudes () const |
| void | setLatitudes (int latitudes) |
| int | rings () const |
| void | setRings (int rings) |
| float | height () const |
| void | setHeight (float height) |
| float | diameter () const |
| void | setDiameter (float diameter) |
| Public Member Functions inherited from QQuick3DGeometry | |
| QQuick3DGeometry (QQuick3DObject *parent=nullptr) | |
| ~QQuick3DGeometry () override | |
| QByteArray | vertexData () const |
| Returns the vertex buffer data set by setVertexData. | |
| QByteArray | indexData () const |
| Returns the index buffer data. | |
| int | attributeCount () const |
| Returns the number of attributes defined for this geometry. | |
| Attribute | attribute (int index) const |
| Returns attribute definition number index. | |
| PrimitiveType | primitiveType () const |
| Returns the primitive type used when rendering. | |
| QVector3D | boundsMin () const |
| QVector3D | boundsMax () const |
| int | stride () const |
| void | setVertexData (const QByteArray &data) |
| Sets the vertex buffer data. | |
| void | setVertexData (int offset, const QByteArray &data) |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Updates a subset of the vertex buffer. | |
| void | setIndexData (const QByteArray &data) |
| Sets the index buffer to data. | |
| void | setIndexData (int offset, const QByteArray &data) |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. Updates a subset of the index buffer. | |
| void | setStride (int stride) |
| Sets the stride of the vertex buffer to stride, measured in bytes. | |
| void | setBounds (const QVector3D &min, const QVector3D &max) |
| Sets the bounding volume of the geometry to the cube defined by the points min and max. | |
| void | setPrimitiveType (PrimitiveType type) |
| Sets the primitive type used for rendering to type. | |
| void | addAttribute (Attribute::Semantic semantic, int offset, Attribute::ComponentType componentType) |
| Adds vertex attribute description. | |
| void | addAttribute (const Attribute &att) |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Adds vertex attribute description. | |
| Q_REVISION (6, 3) int subsetCount() const | |
| Q_REVISION (6, 3) QVector3D subsetBoundsMin(int subset) const | |
| Q_REVISION (6, 3) QVector3D subsetBoundsMax(int subset) const | |
| Q_REVISION (6, 3) int subsetOffset(int subset) const | |
| Q_REVISION (6, 3) int subsetCount(int subset) const | |
| Q_REVISION (6, 3) QString subsetName(int subset) const | |
| Q_REVISION (6, 3) void addSubset(int offset | |
| Q_REVISION (6, 6) QByteArray targetData() const | |
| Q_REVISION (6, 6) void setTargetData(const QByteArray &data) | |
| Q_REVISION (6, 6) void setTargetData(int offset | |
| Q_REVISION (6, 6) TargetAttribute targetAttribute(int index) const | |
| Q_REVISION (6, 6) int targetAttributeCount() const | |
| Q_REVISION (6, 6) void addTargetAttribute(quint32 targetId | |
| Q_REVISION (6, 6) void addTargetAttribute(const TargetAttribute &att) | |
| void | clear () |
| Resets the geometry to its initial state, clearing previously set vertex and index data as well as attributes. | |
| Public Member Functions inherited from QObject | |
| Q_INVOKABLE | QObject (QObject *parent=nullptr) |
| Constructs an object with parent object parent. | |
| virtual | ~QObject () |
| Destroys the object, deleting all its child objects. | |
| virtual bool | event (QEvent *event) |
| This virtual function receives events to an object and should return true if the event e was recognized and processed. | |
| virtual bool | eventFilter (QObject *watched, QEvent *event) |
| Filters events if this object has been installed as an event filter for the watched object. | |
| QString | objectName () const |
| Q_WEAK_OVERLOAD void | setObjectName (const QString &name) |
| Sets the object's name to name. | |
| void | setObjectName (QAnyStringView name) |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. | |
| QBindable< QString > | bindableObjectName () |
| bool | isWidgetType () const |
Returns true if the object is a widget; otherwise returns false. | |
| bool | isWindowType () const |
Returns true if the object is a window; otherwise returns false. | |
| bool | isQuickItemType () const |
Returns true if the object is a QQuickItem; otherwise returns false. | |
| bool | isQmlObjectType () const |
| Returns whether the object has been created by the QML engine or ownership has been explicitly set via QJSEngine::setObjectOwnership(). | |
| bool | signalsBlocked () const noexcept |
Returns true if signals are blocked; otherwise returns false. | |
| bool | blockSignals (bool b) noexcept |
| If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). | |
| QThread * | thread () const |
| Returns the thread in which the object lives. | |
| bool | moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL) |
Changes the thread affinity for this object and its children and returns true on success. | |
| int | startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer) |
| This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds. | |
| int | startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer) |
| void | killTimer (int id) |
| Kills the timer with timer identifier, id. | |
| void | killTimer (Qt::TimerId id) |
| template<typename T> | |
| T | findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object. | |
| template<typename T> | |
| QList< T > | findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. | |
| template<typename T> | |
| T | findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. | |
| template<typename T> | |
| QList< T > | findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. | |
| const QObjectList & | children () const |
| Returns a list of child objects. | |
| void | setParent (QObject *parent) |
| Makes the object a child of parent. | |
| void | installEventFilter (QObject *filterObj) |
| Installs an event filter filterObj on this object. | |
| void | removeEventFilter (QObject *obj) |
| Removes an event filter object obj from this object. | |
| QMetaObject::Connection | connect (const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const |
| bool | disconnect (const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) const |
| bool | disconnect (const QObject *receiver, const char *member=nullptr) const |
| void | dumpObjectTree () const |
| Dumps a tree of children to the debug output. | |
| void | dumpObjectInfo () const |
| Dumps information about signal connections, etc. | |
| bool | setProperty (const char *name, const QVariant &value) |
| Sets the value of the object's name property to value. | |
| bool | setProperty (const char *name, QVariant &&value) |
| QVariant | property (const char *name) const |
| Returns the value of the object's name property. | |
| QList< QByteArray > | dynamicPropertyNames () const |
| QBindingStorage * | bindingStorage () |
| const QBindingStorage * | bindingStorage () const |
| QObject * | parent () const |
| Returns a pointer to the parent object. | |
| bool | inherits (const char *classname) const |
Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false. | |
| Public Member Functions inherited from QQmlParserStatus | |
| QQmlParserStatus () | |
| virtual | ~QQmlParserStatus () |
Properties | |
| bool | enableNormals |
| bool | enableUV |
| int | longitudes |
| int | latitudes |
| int | rings |
| float | height |
| float | diameter |
| Properties inherited from QQuick3DObject | |
| QQuick3DObject * | parent |
| \qmlproperty Object3D QtQuick3D::Object3D::parent This property holds the parent of the Object3D in a 3D scene. | |
| Properties inherited from QObject | |
| QString | objectName |
| the name of this object | |
Additional Inherited Members | |
| Public Types inherited from QQuick3DGeometry | |
| enum class | PrimitiveType { Points , LineStrip , Lines , TriangleStrip , TriangleFan , Triangles } |
| Public Slots inherited from QQuick3DObject | |
| void | update () |
| void | setParentItem (QQuick3DObject *parentItem) |
| Public Slots inherited from QObject | |
| void | deleteLater () |
| \threadsafe | |
| Static Public Member Functions inherited from QObject | |
| static QMetaObject::Connection | connect (const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection) |
| \threadsafe | |
| static QMetaObject::Connection | connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection) |
| template<typename Func1, typename Func2> | |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection) |
| template<typename Func1, typename Func2> | |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot) |
| static bool | disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *member) |
| \threadsafe | |
| static bool | disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member) |
| static bool | disconnect (const QMetaObject::Connection &) |
| Disconnect a connection. | |
| template<typename Func1, typename Func2> | |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot) |
| template<typename Func1> | |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero) |
| Public Attributes inherited from QQuick3DGeometry | |
| int | count |
| int const QVector3D & | boundsMin |
| Returns the minimum coordinate of the bounding volume. | |
| int const QVector3D const QVector3D & | boundsMax |
| Returns the maximum coordinate of the bounding volume. | |
| int const QVector3D const QVector3D const QString & | name = {}) |
| const QByteArray & | data |
| Attribute::Semantic | semantic |
| Attribute::Semantic int | offset |
| Attribute::Semantic int int | stride = 0) |
| Returns the byte stride of the vertex buffer. | |
| Protected Member Functions inherited from QQuick3DGeometry | |
| QSSGRenderGraphObject * | updateSpatialNode (QSSGRenderGraphObject *node) override |
| void | markAllDirty () override |
| Protected Member Functions inherited from QQuick3DObject | |
| virtual void | itemChange (ItemChange, const ItemChangeData &) |
| QQuick3DObject (QQuick3DObjectPrivate &dd, QQuick3DObject *parent=nullptr) | |
| void | classBegin () override |
| Invoked after class creation, but before any properties have been set. | |
| void | componentComplete () override |
| Invoked after the root component that caused this instantiation has completed construction. | |
| bool | isComponentComplete () const |
| virtual void | preSync () |
| Protected Member Functions inherited from QObject | |
| QObject * | sender () const |
| Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr. | |
| int | senderSignalIndex () const |
| int | receivers (const char *signal) const |
| Returns the number of receivers connected to the signal. | |
| bool | isSignalConnected (const QMetaMethod &signal) const |
| virtual void | timerEvent (QTimerEvent *event) |
| This event handler can be reimplemented in a subclass to receive timer events for the object. | |
| virtual void | childEvent (QChildEvent *event) |
| This event handler can be reimplemented in a subclass to receive child events. | |
| virtual void | customEvent (QEvent *event) |
| This event handler can be reimplemented in a subclass to receive custom events. | |
| virtual void | connectNotify (const QMetaMethod &signal) |
| virtual void | disconnectNotify (const QMetaMethod &signal) |
| QObject (QObjectPrivate &dd, QObject *parent=nullptr) | |
| Protected Attributes inherited from QObject | |
| QScopedPointer< QObjectData > | d_ptr |
| Related Symbols inherited from QObject | |
| template< class T > T | qobject_cast (const QObject *object) |
| Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr. | |
| template< typename T > T | qFindChildqFindChildren (const QObject *obj, const QString &name)() |
| template< typename T > QList< T > | qFindChildrenqFindChildren (const QObject *obj, const QString &name)() |
| QObjectList | |
| \macro Q_CLASSINFO(Name, Value) | |
Definition at line 22 of file qcapsulegeometry_p.h.
| QT_BEGIN_NAMESPACE CapsuleGeometryPhysics::CapsuleGeometryPhysics | ( | ) |
\qmltype CapsuleGeometry \inqmlmodule QtQuick3D.Physics.Helpers \inherits Geometry
A geometry for generating a capsule model.
Deprecated, use \l{QtQuick3D.Helpers.CapsuleGeometry}.
A geometry for generating a capsule model.
\qmlproperty bool CapsuleGeometry::enableNormals \default true
Generate mesh face normals.
\qmlproperty bool CapsuleGeometry::enableUV \default false
Generate mesh uv coordinates.
\qmlproperty int CapsuleGeometry::longitudes \default 32
Number of longitudes, or meridians, distributed by azimuth.
\qmlproperty int CapsuleGeometry::latitudes \default 16
Number of latitudes, distributed by inclination. Must be even.
\qmlproperty int CapsuleGeometry::rings \default 1
Number of sections in cylinder between hemispheres.
\qmlproperty real CapsuleGeometry::height \default 100
Height of the middle cylinder on the y axis, excluding the hemispheres.
\qmlproperty real CapsuleGeometry::diameter \default 100
Diameter on the xz plane.
A geometry for generating a capsule model.
Deprecated, use \l{QtQuick3D.Helpers.CapsuleGeometry}.
A geometry for generating a capsule model.
\qmlproperty bool CapsuleGeometry::enableNormals \default true
Generate mesh face normals.
\qmlproperty bool CapsuleGeometry::enableUV \default false
Generate mesh uv coordinates.
\qmlproperty int CapsuleGeometry::longitudes \default 32
Number of longitudes, or meridians, distributed by azimuth.
\qmlproperty int CapsuleGeometry::latitudes \default 16
Number of latitudes, distributed by inclination. Must be even.
\qmlproperty int CapsuleGeometry::rings \default 1
Number of sections in cylinder between hemispheres.
\qmlproperty real CapsuleGeometry::height \default 100
Height of the middle cylinder on the y axis, excluding the hemispheres.
\qmlproperty real CapsuleGeometry::diameter \default 100
Diameter on the xz plane.
Definition at line 68 of file qcapsulegeometry.cpp.
|
inline |
Definition at line 57 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 39 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 42 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 54 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 48 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 45 of file qcapsulegeometry_p.h.
|
signal |
|
inline |
Definition at line 51 of file qcapsulegeometry_p.h.
|
signal |
| void CapsuleGeometryPhysics::setDiameter | ( | float | diameter | ) |
Definition at line 139 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setEnableNormals | ( | bool | enable | ) |
Definition at line 73 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setEnableUV | ( | bool | enable | ) |
Definition at line 84 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setHeight | ( | float | height | ) |
Definition at line 128 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setLatitudes | ( | int | latitudes | ) |
Definition at line 106 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setLongitudes | ( | int | longitudes | ) |
Definition at line 95 of file qcapsulegeometry.cpp.
| void CapsuleGeometryPhysics::setRings | ( | int | rings | ) |
Definition at line 117 of file qcapsulegeometry.cpp.
|
readwrite |
Definition at line 34 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 26 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 28 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 33 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 31 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 30 of file qcapsulegeometry_p.h.
|
readwrite |
Definition at line 32 of file qcapsulegeometry_p.h.
1.14.0