#include <qquickdialog_p.h>

Inheritance diagram for QQuickDialog:

Collaboration diagram for QQuickDialog:

Public Types
enum	StandardCode { Rejected , Accepted }

Public Slots
virtual void	accept ()
	\qmlmethod void QtQuick.Controls::Dialog::accept()
virtual void	reject ()
	\qmlmethod void QtQuick.Controls::Dialog::reject()
virtual void	done (int result)
Public Slots inherited from QQuickPopup
void	open ()
	\qmlmethod void QtQuick.Controls::Popup::open()
void	close ()
	\qmlmethod void QtQuick.Controls::Popup::close()
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals
void	accepted ()
void	rejected ()
void	titleChanged ()
void	headerChanged ()
void	footerChanged ()
void	standardButtonsChanged ()
	Q_REVISION (2, 3) void applied()
	Q_REVISION (2, 3) void reset()
	Q_REVISION (2, 3) void discarded()
	Q_REVISION (2, 3) void helpRequested()
	Q_REVISION (2, 3) void resultChanged()
void	implicitHeaderWidthChanged ()
void	implicitHeaderHeightChanged ()
void	implicitFooterWidthChanged ()
void	implicitFooterHeightChanged ()
Signals inherited from QQuickPopup
void	opened ()
void	closed ()
void	aboutToShow ()
void	aboutToHide ()
void	xChanged ()
void	yChanged ()
void	zChanged ()
void	widthChanged ()
void	heightChanged ()
void	implicitWidthChanged ()
void	implicitHeightChanged ()
void	contentWidthChanged ()
void	contentHeightChanged ()
void	availableWidthChanged ()
void	availableHeightChanged ()
void	marginsChanged ()
void	topMarginChanged ()
void	leftMarginChanged ()
void	rightMarginChanged ()
void	bottomMarginChanged ()
void	paddingChanged ()
void	topPaddingChanged ()
void	leftPaddingChanged ()
void	rightPaddingChanged ()
void	bottomPaddingChanged ()
void	fontChanged ()
void	localeChanged ()
void	parentChanged ()
void	backgroundChanged ()
void	contentItemChanged ()
void	contentChildrenChanged ()
void	clipChanged ()
void	focusChanged ()
void	activeFocusChanged ()
void	modalChanged ()
void	dimChanged ()
void	visibleChanged ()
void	opacityChanged ()
void	scaleChanged ()
void	closePolicyChanged ()
void	enterChanged ()
void	exitChanged ()
void	windowChanged (QQuickWindow *window)
	Q_REVISION (2, 1) void spacingChanged()
	Q_REVISION (2, 3) void openedChanged()
	Q_REVISION (2, 3) void mirroredChanged()
	Q_REVISION (2, 3) void enabledChanged()
	Q_REVISION (2, 3) void paletteChanged()
	Q_REVISION (2, 3) void paletteCreated()
	Q_REVISION (2, 5) void horizontalPaddingChanged()
	Q_REVISION (2, 5) void verticalPaddingChanged()
	Q_REVISION (2, 5) void implicitContentWidthChanged()
	Q_REVISION (2, 5) void implicitContentHeightChanged()
	Q_REVISION (2, 5) void implicitBackgroundWidthChanged()
	Q_REVISION (2, 5) void implicitBackgroundHeightChanged()
	Q_REVISION (2, 5) void topInsetChanged()
	Q_REVISION (2, 5) void leftInsetChanged()
	Q_REVISION (2, 5) void rightInsetChanged()
	Q_REVISION (2, 5) void bottomInsetChanged()
	Q_REVISION (6, 8) void popupTypeChanged()
Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.
void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickDialog (QObject *parent=nullptr)
	~QQuickDialog ()
QString	title () const
	\qmlproperty string QtQuick.Controls::Dialog::title
void	setTitle (const QString &title)
QQuickItem *	header () const
	\qmlproperty Item QtQuick.Controls::Dialog::header
void	setHeader (QQuickItem *header)
QQuickItem *	footer () const
	\qmlproperty Item QtQuick.Controls::Dialog::footer
void	setFooter (QQuickItem *footer)
QPlatformDialogHelper::StandardButtons	standardButtons () const
	\qmlproperty enumeration QtQuick.Controls::Dialog::standardButtons
void	setStandardButtons (QPlatformDialogHelper::StandardButtons buttons)
int	result () const
void	setResult (int result)
qreal	implicitHeaderWidth () const
qreal	implicitHeaderHeight () const
qreal	implicitFooterWidth () const
qreal	implicitFooterHeight () const
void	setOpacity (qreal opacity) override
Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.
virtual	~QObject ()
	Destroys the object, deleting all its child objects.
virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.
virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.
QString	objectName () const
Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.
void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
QBindable< QString >	bindableObjectName ()
bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.
bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.
bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.
bool	isQmlObjectType () const
	Returns whether the object has been created by the QML engine or ownership has been explicitly set via QJSEngine::setObjectOwnership().
bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.
bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
QThread *	thread () const
	Returns the thread in which the object lives.
bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.
int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)
void	killTimer (int id)
	Kills the timer with timer identifier, id.
void	killTimer (Qt::TimerId id)
template<typename T>
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
template<typename T>
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
template<typename T>
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
template<typename T>
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
const QObjectList &	children () const
	Returns a list of child objects.
void	setParent (QObject *parent)
	Makes the object a child of parent.
void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.
void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.
QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const
bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const
bool	disconnect (const QObject receiver, const char member=nullptr) const
void	dumpObjectTree () const
	Dumps a tree of children to the debug output.
void	dumpObjectInfo () const
	Dumps information about signal connections, etc.
bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.
bool	setProperty (const char *name, QVariant &&value)
QVariant	property (const char *name) const
	Returns the value of the object's name property.
QList< QByteArray >	dynamicPropertyNames () const
QBindingStorage *	bindingStorage ()
const QBindingStorage *	bindingStorage () const
QObject *	parent () const
	Returns a pointer to the parent object.
bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.
Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()
virtual	~QQmlParserStatus ()

Protected Member Functions
	QQuickDialog (QQuickDialogPrivate &dd, QObject *parent)
Protected Member Functions inherited from QQuickPopup
	QQuickPopup (QQuickPopupPrivate &dd, QObject *parent)
void	classBegin () override
	Invoked after class creation, but before any properties have been set.
void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.
bool	isComponentComplete () const
virtual bool	childMouseEventFilter (QQuickItem child, QEvent event)
virtual void	focusInEvent (QFocusEvent *event)
virtual void	focusOutEvent (QFocusEvent *event)
virtual void	keyPressEvent (QKeyEvent *event)
virtual void	keyReleaseEvent (QKeyEvent *event)
virtual void	mousePressEvent (QMouseEvent *event)
virtual void	mouseMoveEvent (QMouseEvent *event)
virtual void	mouseReleaseEvent (QMouseEvent *event)
virtual void	mouseDoubleClickEvent (QMouseEvent *event)
virtual void	mouseUngrabEvent ()
virtual bool	overlayEvent (QQuickItem item, QEvent event)
virtual void	contentItemChange (QQuickItem newItem, QQuickItem oldItem)
virtual void	contentSizeChange (const QSizeF &newSize, const QSizeF &oldSize)
virtual void	fontChange (const QFont &newFont, const QFont &oldFont)
virtual void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry)
virtual void	localeChange (const QLocale &newLocale, const QLocale &oldLocale)
virtual void	itemChange (QQuickItem::ItemChange change, const QQuickItem::ItemChangeData &data)
virtual void	marginsChange (const QMarginsF &newMargins, const QMarginsF &oldMargins)
virtual void	paddingChange (const QMarginsF &newPadding, const QMarginsF &oldPadding)
virtual void	spacingChange (qreal newSpacing, qreal oldSpacing)
virtual void	insetChange (const QMarginsF &newInset, const QMarginsF &oldInset)
virtual QFont	defaultFont () const
QString	accessibleName () const
void	maybeSetAccessibleName (const QString &name)
QVariant	accessibleProperty (const char *propertyName)
bool	setAccessibleProperty (const char *propertyName, const QVariant &value)
Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.
int	senderSignalIndex () const
int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.
bool	isSignalConnected (const QMetaMethod &signal) const
virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.
virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.
virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.
virtual void	connectNotify (const QMetaMethod &signal)
virtual void	disconnectNotify (const QMetaMethod &signal)
	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
QString	title
QQuickItem *	header
QQuickItem *	footer
QPlatformDialogHelper::StandardButtons	standardButtons
int	result
qreal	implicitHeaderWidth
qreal	implicitHeaderHeight
qreal	implicitFooterWidth
qreal	implicitFooterHeight
Properties inherited from QQuickPopup
qreal	x
qreal	y
qreal	z
qreal	width
qreal	height
qreal	implicitWidth
qreal	implicitHeight
qreal	contentWidth
qreal	contentHeight
qreal	availableWidth
qreal	availableHeight
qreal	margins
qreal	topMargin
qreal	leftMargin
qreal	rightMargin
qreal	bottomMargin
qreal	padding
qreal	topPadding
qreal	leftPadding
qreal	rightPadding
qreal	bottomPadding
QLocale	locale
QFont	font
QQuickItem *	parent
QQuickItem *	background
QQuickItem *	contentItem
bool	clip
bool	focus
bool	activeFocus
bool	modal
bool	dim
bool	visible
qreal	opacity
qreal	scale
ClosePolicy	closePolicy
TransformOrigin	transformOrigin
QQuickTransition *	enter
QQuickTransition *	exit
qreal	spacing
bool	opened
bool	mirrored
bool	enabled
Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe
static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)
static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe
static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)
static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.
template<typename Func1, typename Func2>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)
template<typename Func1>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)
Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr
Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.
template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()
template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()
	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 29 of file qquickdialog_p.h.

Member Enumeration Documentation

◆ StandardCode

enum QQuickDialog::StandardCode

Enumerator
Rejected
Accepted

Definition at line 65 of file qquickdialog_p.h.

Constructor & Destructor Documentation

◆ QQuickDialog() [1/2]

QQuickDialog::QQuickDialog ( QObject * parent = nullptr )

explicit

Definition at line 177 of file qquickdialog.cpp.

◆ ~QQuickDialog()

QQuickDialog::~QQuickDialog ( )

Definition at line 197 of file qquickdialog.cpp.

◆ QQuickDialog() [2/2]

QQuickDialog::QQuickDialog	(	QQuickDialogPrivate &	dd,
		QObject *	parent )

protected

Definition at line 182 of file qquickdialog.cpp.

Member Function Documentation

◆ accept

void QQuickDialog::accept ( )

virtualslot

\qmlmethod void QtQuick.Controls::Dialog::accept()

Emits the \l accepted() signal and closes the dialog.

See also: reject(), done()

Definition at line 520 of file qquickdialog.cpp.

◆ accepted

void QQuickDialog::accepted ( )

signal

◆ done

void QQuickDialog::done ( int result )

virtualslot

Since: QtQuick.Controls 2.3 (Qt 5.10) \qmlmethod void QtQuick.Controls::Dialog::done(int result)

\list 1

Sets the result.
Emits \l accepted() or \l rejected() depending on whether the result is Dialog.Accepted or Dialog.Rejected, respectively.
Emits \l{Popup::}{closed()}. \endlist

See also: accept(), reject(), result

Definition at line 551 of file qquickdialog.cpp.

◆ footer()

QQuickItem * QQuickDialog::footer ( ) const

\qmlproperty Item QtQuick.Controls::Dialog::footer

This property holds the dialog footer item. The footer item is positioned to the bottom, and resized to the width of the dialog. The default value is null.

Note: Assigning a \l DialogButtonBox as a dialog footer automatically connects its \l {DialogButtonBox::}{accepted()} and \l {DialogButtonBox::}{rejected()} signals to the respective signals in Dialog.; Assigning a \l DialogButtonBox, \l ToolBar, or \l TabBar as a dialog footer automatically sets the respective \l DialogButtonBox::position, \l ToolBar::position, or \l TabBar::position property to Footer.

See also: header

Definition at line 312 of file qquickdialog.cpp.

◆ footerChanged

void QQuickDialog::footerChanged ( )

signal

◆ header()

QQuickItem * QQuickDialog::header ( ) const

\qmlproperty Item QtQuick.Controls::Dialog::header

This property holds the dialog header item. The header item is positioned to the top, and resized to the width of the dialog. The default value is null.

Note: Assigning a \l DialogButtonBox as a dialog header automatically connects its \l {DialogButtonBox::}{accepted()} and \l {DialogButtonBox::}{rejected()} signals to the respective signals in Dialog.; Assigning a \l DialogButtonBox, \l ToolBar, or \l TabBar as a dialog header automatically sets the respective \l DialogButtonBox::position, \l ToolBar::position, or \l TabBar::position property to Header.

See also: footer

Definition at line 262 of file qquickdialog.cpp.

◆ headerChanged

void QQuickDialog::headerChanged ( )

signal

◆ implicitFooterHeight()

qreal QQuickDialog::implicitFooterHeight ( ) const

Since: QtQuick.Controls 2.5 (Qt 5.12) \qmlproperty real QtQuick.Controls::Dialog::implicitFooterHeight \readonly

This property holds the implicit footer height.

The value is equal to {footer && footer.visible ? footer.implicitHeight : 0}.

See also: implicitFooterWidth, implicitHeaderHeight

Definition at line 501 of file qquickdialog.cpp.

◆ implicitFooterHeightChanged

void QQuickDialog::implicitFooterHeightChanged ( )

signal

◆ implicitFooterWidth()

qreal QQuickDialog::implicitFooterWidth ( ) const

Since: QtQuick.Controls 2.5 (Qt 5.12) \qmlproperty real QtQuick.Controls::Dialog::implicitFooterWidth \readonly

This property holds the implicit footer width.

The value is equal to {footer && footer.visible ? footer.implicitWidth : 0}.

See also: implicitFooterHeight, implicitHeaderWidth

Definition at line 484 of file qquickdialog.cpp.

◆ implicitFooterWidthChanged

void QQuickDialog::implicitFooterWidthChanged ( )

signal

◆ implicitHeaderHeight()

qreal QQuickDialog::implicitHeaderHeight ( ) const

Since: QtQuick.Controls 2.5 (Qt 5.12) \qmlproperty real QtQuick.Controls::Dialog::implicitHeaderHeight \readonly

This property holds the implicit header height.

The value is equal to {header && header.visible ? header.implicitHeight : 0}.

See also: implicitHeaderWidth, implicitFooterHeight

Definition at line 467 of file qquickdialog.cpp.

◆ implicitHeaderHeightChanged

void QQuickDialog::implicitHeaderHeightChanged ( )

signal

◆ implicitHeaderWidth()

qreal QQuickDialog::implicitHeaderWidth ( ) const

Since: QtQuick.Controls 2.5 (Qt 5.12) \qmlproperty real QtQuick.Controls::Dialog::implicitHeaderWidth \readonly

This property holds the implicit header width.

The value is equal to {header && header.visible ? header.implicitWidth : 0}.

See also: implicitHeaderHeight, implicitFooterWidth

Definition at line 450 of file qquickdialog.cpp.

◆ implicitHeaderWidthChanged

void QQuickDialog::implicitHeaderWidthChanged ( )

signal

◆ Q_REVISION [1/5]

QQuickDialog::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [2/5]

QQuickDialog::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [3/5]

QQuickDialog::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [4/5]

QQuickDialog::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [5/5]

QQuickDialog::Q_REVISION	(	2	,
		3	)

signal

◆ reject

void QQuickDialog::reject ( )

virtualslot

\qmlmethod void QtQuick.Controls::Dialog::reject()

Emits the \l rejected() signal and closes the dialog.

See also: accept(), done()

Definition at line 532 of file qquickdialog.cpp.

◆ rejected

void QQuickDialog::rejected ( )

signal

◆ result()

int QQuickDialog::result ( ) const

Since: QtQuick.Controls 2.3 (Qt 5.10) \qmlproperty int QtQuick.Controls::Dialog::result

This property holds the result code.

Standard result codes: \value Dialog.Accepted The dialog was accepted. \value Dialog.Rejected The dialog was rejected.

See also: accept(), reject(), done()

Definition at line 423 of file qquickdialog.cpp.

◆ setFooter()

void QQuickDialog::setFooter ( QQuickItem * footer )

Definition at line 318 of file qquickdialog.cpp.

◆ setHeader()

void QQuickDialog::setHeader ( QQuickItem * header )

Definition at line 268 of file qquickdialog.cpp.

◆ setOpacity()

void QQuickDialog::setOpacity ( qreal opacity )

overridevirtual

Reimplemented from QQuickPopup.

Definition at line 507 of file qquickdialog.cpp.

◆ setResult()

void QQuickDialog::setResult ( int result )

Definition at line 429 of file qquickdialog.cpp.

◆ setStandardButtons()

void QQuickDialog::setStandardButtons ( QPlatformDialogHelper::StandardButtons buttons )

Definition at line 383 of file qquickdialog.cpp.

◆ setTitle()

void QQuickDialog::setTitle ( const QString & title )

Definition at line 231 of file qquickdialog.cpp.

◆ standardButtons()

QPlatformDialogHelper::StandardButtons QQuickDialog::standardButtons ( ) const

\qmlproperty enumeration QtQuick.Controls::Dialog::standardButtons

This property holds a combination of standard buttons that are used by the dialog.

Dialog {
    id: dialog
    title: "Title"
    standardButtons: Dialog.Ok | Dialog.Cancel
 
    onAccepted: console.log("Ok clicked")
    onRejected: console.log("Cancel clicked")
}

The buttons will be positioned in the appropriate order for the user's platform.

Possible flags: \value Dialog.Ok An "OK" button defined with the AcceptRole. \value Dialog.Open An "Open" button defined with the AcceptRole. \value Dialog.Save A "Save" button defined with the AcceptRole. \value Dialog.Cancel A "Cancel" button defined with the RejectRole. \value Dialog.Close A "Close" button defined with the RejectRole. \value Dialog.Discard A "Discard" or "Don't Save" button, depending on the platform, defined with the DestructiveRole. \value Dialog.Apply An "Apply" button defined with the ApplyRole. \value Dialog.Reset A "Reset" button defined with the ResetRole. \value Dialog.RestoreDefaults A "Restore Defaults" button defined with the ResetRole. \value Dialog.Help A "Help" button defined with the HelpRole. \value Dialog.SaveAll A "Save All" button defined with the AcceptRole. \value Dialog.Yes A "Yes" button defined with the YesRole. \value Dialog.YesToAll A "Yes to All" button defined with the YesRole. \value Dialog.No A "No" button defined with the NoRole. \value Dialog.NoToAll A "No to All" button defined with the NoRole. \value Dialog.Abort An "Abort" button defined with the RejectRole. \value Dialog.Retry A "Retry" button defined with the AcceptRole. \value Dialog.Ignore An "Ignore" button defined with the AcceptRole. \value Dialog.NoButton An invalid button.

See also: DialogButtonBox

Definition at line 377 of file qquickdialog.cpp.

◆ standardButtonsChanged

void QQuickDialog::standardButtonsChanged ( )

signal

◆ title()

QString QQuickDialog::title ( ) const

\qmlproperty string QtQuick.Controls::Dialog::title

This property holds the dialog title.

The title is displayed in the dialog header.

Dialog {
    title: qsTr("About")
 
    Label {
        text: "Lorem ipsum..."
    }
}

Definition at line 32 of file qquickdialog_p.h.

The documentation for this class was generated from the following files:

qtdeclarative/src/quicktemplates/qquickdialog_p.h (01cd43d30e3ca2c4dd94a4a4711604adb9417517)
qtdeclarative/src/quicktemplates/qquickdialog.cpp (01cd43d30e3ca2c4dd94a4a4711604adb9417517)

Public Types

Public Slots

Signals

Public Member Functions

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ StandardCode

Constructor & Destructor Documentation

◆ QQuickDialog() [1/2]

◆ ~QQuickDialog()

◆ QQuickDialog() [2/2]

Member Function Documentation

◆ accept

◆ accepted

◆ done

◆ footer()

◆ footerChanged

◆ header()

◆ headerChanged

◆ implicitFooterHeight()

◆ implicitFooterHeightChanged

◆ implicitFooterWidth()

◆ implicitFooterWidthChanged

◆ implicitHeaderHeight()

◆ implicitHeaderHeightChanged

◆ implicitHeaderWidth()

◆ implicitHeaderWidthChanged

◆ Q_REVISION [1/5]

◆ Q_REVISION [2/5]

◆ Q_REVISION [3/5]

◆ Q_REVISION [4/5]

◆ Q_REVISION [5/5]

◆ reject

◆ rejected

◆ result()

◆ setFooter()

◆ setHeader()

◆ setOpacity()

◆ setResult()

◆ setStandardButtons()

◆ setTitle()

◆ standardButtons()

◆ standardButtonsChanged

◆ title()

◆ titleChanged

Property Documentation

◆ footer

◆ header

◆ implicitFooterHeight

◆ implicitFooterWidth

◆ implicitHeaderHeight

◆ implicitHeaderWidth

◆ result

◆ standardButtons

◆ title