#include <qquickloader_p.h>

Inheritance diagram for QQuickLoader:

Collaboration diagram for QQuickLoader:

Public Types
enum	Status { Null , Ready , Loading , Error }

Public Types inherited from QQuickItem
enum	Flag { ItemClipsChildrenToShape = 0x01 , ItemIsFocusScope = 0x04 , ItemHasContents = 0x08 , ItemAcceptsDrops = 0x10 , ItemIsViewport = 0x20 , ItemObservesViewport = 0x40 }
	\qmltype Item \nativetype QQuickItem \inherits QtObject \inqmlmodule QtQuick More...

enum	ItemChange { ItemChildAddedChange , ItemChildRemovedChange , ItemSceneChange , ItemVisibleHasChanged , ItemParentHasChanged , ItemOpacityHasChanged , ItemActiveFocusHasChanged , ItemRotationHasChanged , ItemAntialiasingHasChanged , ItemDevicePixelRatioHasChanged , ItemEnabledHasChanged , ItemScaleHasChanged , ItemTransformHasChanged }
	Used in conjunction with QQuickItem::itemChange() to notify the item about certain types of changes. More...

enum	TransformOrigin { TopLeft , Top , TopRight , Left , Center , Right , BottomLeft , Bottom , BottomRight }
	\variable QQuickItem::ItemChangeData::realValue The numeric value that has changed: \l {QQuickItem::opacity()}{opacity}, \l {QQuickItem::rotation()}{rotation}, or \l {QQuickItem::scale()}{scale}, or \l {QScreen::devicePixelRatio}{device pixel ratio}. More...

Signals
void	itemChanged ()

void	activeChanged ()

void	sourceChanged ()

void	sourceComponentChanged ()

void	statusChanged ()

void	progressChanged ()

void	loaded ()

void	asynchronousChanged ()

Signals inherited from QQuickItem
void	childrenRectChanged (const QRectF &)

void	baselineOffsetChanged (qreal)

void	stateChanged (const QString &)

void	focusChanged (bool)

void	activeFocusChanged (bool)

Q_REVISION(6, 7) void focusPolicyChanged(Qt	Q_REVISION (2, 1) void activeFocusOnTabChanged(bool)

void	parentChanged (QQuickItem *)

void	transformOriginChanged (TransformOrigin)

void	smoothChanged (bool)

void	antialiasingChanged (bool)

void	clipChanged (bool)

	Q_REVISION (2, 1) void windowChanged(QQuickWindow *window)

void	childrenChanged ()

void	opacityChanged ()

void	enabledChanged ()

void	visibleChanged ()

void	visibleChildrenChanged ()

void	rotationChanged ()

void	scaleChanged ()

void	xChanged ()

void	yChanged ()

void	widthChanged ()

void	heightChanged ()

void	zChanged ()

void	implicitWidthChanged ()

void	implicitHeightChanged ()

	Q_REVISION (2, 11) void containmentMaskChanged()

	Q_REVISION (6, 0) void paletteChanged()

	Q_REVISION (6, 0) void paletteCreated()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickLoader (QQuickItem *parent=nullptr)
	\qmltype Loader \nativetype QQuickLoader \inqmlmodule QtQuick\inherits Item

virtual	~QQuickLoader ()

bool	active () const
	\qmlproperty bool QtQuick::Loader::active This property is `true` if the Loader is currently active.

void	setActive (bool newVal)

Q_INVOKABLE void	setSource (const QUrl &source, QJSValue initialProperties)

Q_INVOKABLE void	setSource (const QUrl &source)

QUrl	source () const
	\qmlproperty url QtQuick::Loader::source This property holds the URL of the QML component to instantiate.

void	setSourceWithoutResolve (const QUrl &source)

QQmlComponent *	sourceComponent () const
	\qmlproperty Component QtQuick::Loader::sourceComponent This property holds the \l{Component} to instantiate.

void	setSourceComponent (QQmlComponent *)

void	resetSourceComponent ()

Status	status () const
	\qmlproperty enumeration QtQuick::Loader::status

qreal	progress () const
	\qmlsignal QtQuick::Loader::loaded()

bool	asynchronous () const
	\qmlproperty bool QtQuick::Loader::asynchronous

void	setAsynchronous (bool a)

QObject *	item () const
	\qmlproperty QtObject QtQuick::Loader::item This property holds the top-level object that is currently loaded.

Public Member Functions inherited from QQuickItem
	QQuickItem (QQuickItem *parent=nullptr)
	Constructs a QQuickItem with the given parent.

	~QQuickItem () override
	Destroys the QQuickItem.

QQuickWindow *	window () const
	Returns the window in which this item is rendered.

QQuickItem *	parentItem () const

void	setParentItem (QQuickItem *parent)

void	stackBefore (const QQuickItem *)
	Moves the specified sibling item to the index before this item within the list of children.

void	stackAfter (const QQuickItem *)
	Moves the specified sibling item to the index after this item within the list of children.

QRectF	childrenRect ()
	\qmlpropertygroup QtQuick::Item::childrenRect \qmlproperty real QtQuick::Item::childrenRect.x \qmlproperty real QtQuick::Item::childrenRect.y \qmlproperty real QtQuick::Item::childrenRect.width \qmlproperty real QtQuick::Item::childrenRect.height \readonly

QList< QQuickItem * >	childItems () const
	Returns the children of this item.

bool	clip () const
	\qmlproperty bool QtQuick::Item::clip This property holds whether clipping is enabled.

void	setClip (bool)

QString	state () const
	\qmlproperty string QtQuick::Item::state

void	setState (const QString &)

qreal	baselineOffset () const
	\qmlproperty int QtQuick::Item::baselineOffset

void	setBaselineOffset (qreal)

QQmlListProperty< QQuickTransform >	transform ()

qreal	x () const

qreal	y () const

QPointF	position () const

void	setX (qreal)

void	setY (qreal)

void	setPosition (const QPointF &)

QBindable< qreal >	bindableX ()

QBindable< qreal >	bindableY ()

qreal	width () const

void	setWidth (qreal)

void	resetWidth ()

void	setImplicitWidth (qreal)

qreal	implicitWidth () const
	Returns the width of the item that is implied by other properties that determine the content.

QBindable< qreal >	bindableWidth ()

qreal	height () const

void	setHeight (qreal)

void	resetHeight ()

void	setImplicitHeight (qreal)

qreal	implicitHeight () const

QBindable< qreal >	bindableHeight ()

QSizeF	size () const

void	setSize (const QSizeF &size)

TransformOrigin	transformOrigin () const

void	setTransformOrigin (TransformOrigin)

QPointF	transformOriginPoint () const

void	setTransformOriginPoint (const QPointF &)

qreal	z () const

void	setZ (qreal)

qreal	rotation () const

void	setRotation (qreal)

qreal	scale () const

void	setScale (qreal)

qreal	opacity () const

void	setOpacity (qreal)

bool	isVisible () const

void	setVisible (bool)

bool	isEnabled () const

void	setEnabled (bool)

bool	smooth () const

void	setSmooth (bool)

bool	activeFocusOnTab () const
	\qmlproperty bool QtQuick::Item::activeFocusOnTab

void	setActiveFocusOnTab (bool)

bool	antialiasing () const

void	setAntialiasing (bool)

void	resetAntialiasing ()

Flags	flags () const
	Returns the item flags for this item.

void	setFlag (Flag flag, bool enabled=true)
	Enables the specified flag for this item if enabled is true; if enabled is false, the flag is disabled.

void	setFlags (Flags flags)
	Enables the specified flags for this item.

virtual QRectF	boundingRect () const
	Returns the extents of the item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

virtual QRectF	clipRect () const
	Returns the rectangular area within this item that is currently visible in \l viewportItem(), if there is a viewport and the \l ItemObservesViewport flag is set; otherwise, the extents of this item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

QQuickItem *	viewportItem () const
	If the \l ItemObservesViewport flag is set, returns the nearest parent with the \l ItemIsViewport flag.

bool	hasActiveFocus () const

bool	hasFocus () const

void	setFocus (bool)

void	setFocus (bool focus, Qt::FocusReason reason)

bool	isFocusScope () const
	Returns true if this item is a focus scope, and false otherwise.

QQuickItem *	scopedFocusItem () const
	If this item is a focus scope, this returns the item in its focus chain that currently has focus.

Qt::FocusPolicy	focusPolicy () const

void	setFocusPolicy (Qt::FocusPolicy policy)
	Sets the focus policy of this item to policy.

bool	isAncestorOf (const QQuickItem *child) const
	Returns `true` if this item is an ancestor of child (i.e., if this item is child's parent, or one of child's parent's ancestors).

Qt::MouseButtons	acceptedMouseButtons () const
	Returns the mouse buttons accepted by this item.

void	setAcceptedMouseButtons (Qt::MouseButtons buttons)
	Sets the mouse buttons accepted by this item to buttons.

bool	acceptHoverEvents () const
	Returns whether hover events are accepted by this item.

void	setAcceptHoverEvents (bool enabled)
	If enabled is true, this sets the item to accept hover events; otherwise, hover events are not accepted by this item.

bool	acceptTouchEvents () const
	Returns whether touch events are accepted by this item.

void	setAcceptTouchEvents (bool accept)
	If enabled is true, this sets the item to accept touch events; otherwise, touch events are not accepted by this item.

bool	isUnderMouse () const

void	grabMouse ()

void	ungrabMouse ()

bool	keepMouseGrab () const
	Returns whether mouse input should exclusively remain with this item.

void	setKeepMouseGrab (bool)
	Sets whether the mouse input should remain exclusively with this item.

bool	filtersChildMouseEvents () const
	Returns whether pointer events intended for this item's children should be filtered through this item.

void	setFiltersChildMouseEvents (bool filter)
	Sets whether pointer events intended for this item's children should be filtered through this item.

void	grabTouchPoints (const QList< int > &ids)

void	ungrabTouchPoints ()

bool	keepTouchGrab () const
	Returns whether the touch points grabbed by this item should exclusively remain with this item.

void	setKeepTouchGrab (bool)
	Sets whether the touch points grabbed by this item should remain exclusively with this item.

	Q_REVISION (2, 4) Q_INVOKABLE bool grabToImage(const QJSValue &callback

QSharedPointer< QQuickItemGrabResult >	grabToImage (const QSize &targetSize=QSize())
	Grabs the item into an in-memory image.

virtual Q_INVOKABLE bool	contains (const QPointF &point) const
	\qmlmethod bool QtQuick::Item::contains(point point)

QObject *	containmentMask () const

void	setContainmentMask (QObject *mask)

QTransform	itemTransform (QQuickItem , bool ) const
	\qmlmethod point QtQuick::Item::mapFromItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapFromItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, rect r)

QPointF	mapToScene (const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within the scene's coordinate system, and returns the mapped coordinate.

QRectF	mapRectToItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectToScene (const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within the scene's coordinate system, and returns the mapped rectangle value.

QPointF	mapFromScene (const QPointF &point) const
	Maps the given point in the scene's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

QRectF	mapRectFromItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in item's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectFromScene (const QRectF &rect) const
	Maps the given rect in the scene's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

void	polish ()
	Schedules a polish event for this item.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in item's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(const QPointF &point) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(const QPointF &point) const

Q_INVOKABLE void	forceActiveFocus ()
	\qmlmethod point QtQuick::Item::mapToItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapToItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapToItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapToItem(Item item, rect r)

Q_INVOKABLE void	forceActiveFocus (Qt::FocusReason reason)
	\qmlmethod QtQuick::Item::forceActiveFocus(Qt::FocusReason reason) This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Forces active focus on the item with the given reason.

	Q_REVISION (2, 1) Q_INVOKABLE QQuickItem *nextItemInFocusChain(bool forward

Q_INVOKABLE QQuickItem *	childAt (qreal x, qreal y) const
	\qmlmethod QtQuick::Item::childAt(real x, real y)

	Q_REVISION (6, 3) Q_INVOKABLE void ensurePolished()

	Q_REVISION (6, 3) Q_INVOKABLE void dumpItemTree() const

virtual bool	isTextureProvider () const
	Returns true if this item is a texture provider.

virtual QSGTextureProvider *	textureProvider () const
	Returns the texture provider for an item.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T>
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T>
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T>
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T>
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

Protected Member Functions
void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override

void	componentComplete () override
	\reimp Derived classes should call the base class method before adding their own actions to perform at componentComplete.

void	itemChange (ItemChange change, const ItemChangeData &value) override
	Called when change occurs for this item.

Protected Member Functions inherited from QQuickImplicitSizeItem
	QQuickImplicitSizeItem (QQuickImplicitSizeItemPrivate &dd, QQuickItem *parent)

Protected Member Functions inherited from QQuickItem
bool	event (QEvent *) override
	\reimp

bool	isComponentComplete () const
	Returns true if construction of the QML component is complete; otherwise returns false.

bool	widthValid () const
	Returns whether the width property has been set explicitly.

bool	heightValid () const
	Returns whether the height property has been set explicitly.

void	setImplicitSize (qreal, qreal)

void	classBegin () override
	\reimp Derived classes should call the base class method before adding their own action to perform at classBegin.

virtual void	keyPressEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key press events for an item.

virtual void	keyReleaseEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key release events for an item.

virtual void	focusInEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-in events for an item.

virtual void	focusOutEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-out events for an item.

virtual void	mousePressEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.

virtual void	mouseMoveEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.

virtual void	mouseReleaseEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.

virtual void	mouseDoubleClickEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse double-click events for an item.

virtual void	mouseUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.

virtual void	touchUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a touch ungrab event has occurred on this item.

virtual void	touchEvent (QTouchEvent *event)
	This event handler can be reimplemented in a subclass to receive touch events for an item.

virtual void	hoverEnterEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-enter events for an item.

virtual void	hoverMoveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-move events for an item.

virtual void	hoverLeaveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-leave events for an item.

virtual bool	childMouseEventFilter (QQuickItem , QEvent )
	Reimplement this method to filter the pointer events that are received by this item's children.

virtual bool	contextMenuEvent (QContextMenuEvent *event)

virtual QSGNode *	updatePaintNode (QSGNode , UpdatePaintNodeData )
	Called on the render thread when it is time to sync the state of the item with the scene graph.

virtual void	releaseResources ()
	This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().

virtual void	updatePolish ()
	This function should perform any layout as required for this item.

	QQuickItem (QQuickItemPrivate &dd, QQuickItem *parent=nullptr)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
bool	active

QUrl	source

QQmlComponent *	sourceComponent

QObject *	item

Status	status

qreal	progress

bool	asynchronous

Properties inherited from QQuickImplicitSizeItem
qreal	implicitWidth

qreal	implicitHeight

Properties inherited from QQuickItem
QQuickItem *	parent
	\qmlproperty Item QtQuick::Item::parent This property holds the visual parent of the item.

qreal	x
	\qmlproperty real QtQuick::Item::x \qmlproperty real QtQuick::Item::y \qmlproperty real QtQuick::Item::width \qmlproperty real QtQuick::Item::height

qreal	y
	Defines the item's y position relative to its parent.

qreal	z
	\qmlproperty real QtQuick::Item::z

qreal	width
	This property holds the width of this item.

qreal	height
	This property holds the height of this item.

qreal	opacity
	\qmlproperty real QtQuick::Item::opacity

bool	enabled
	\qmlproperty bool QtQuick::Item::enabled

bool	visible
	\qmlproperty bool QtQuick::Item::visible

Qt::FocusPolicy	focusPolicy
	\qmlproperty enumeration QtQuick::Item::focusPolicy

qreal	rotation
	\qmlproperty real QtQuick::Item::rotation This property holds the rotation of the item in degrees clockwise around its transformOrigin.

qreal	scale
	\qmlproperty real QtQuick::Item::scale This property holds the scale factor for this item.

TransformOrigin	transformOrigin
	\qmlproperty enumeration QtQuick::Item::transformOrigin This property holds the origin point around which scale and rotation transform.

QPointF	transformOriginPoint

QQmlListProperty< QQuickTransform >	transform
	\qmlproperty list<Transform> QtQuick::Item::transform

bool	smooth
	\qmlproperty bool QtQuick::Item::smooth

bool	antialiasing
	\qmlproperty bool QtQuick::Item::antialiasing

qreal	implicitWidth

qreal	implicitHeight

QObject *	containmentMask
	\qmlproperty QObject* QtQuick::Item::containmentMask

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Slots inherited from QQuickItem
void	update ()
	Schedules a call to updatePaintNode() for this item.

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1, typename Func2>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Public Attributes inherited from QQuickItem
const QSize &	targetSize = QSize())

qreal y	const

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 25 of file qquickloader_p.h.

Member Enumeration Documentation

◆ Status

enum QQuickLoader::Status

Enumerator
Null
Ready
Loading
Error

Definition at line 56 of file qquickloader_p.h.

Constructor & Destructor Documentation

◆ QQuickLoader()

QQuickLoader::QQuickLoader ( QQuickItem * parent = nullptr )

\qmltype Loader \nativetype QQuickLoader \inqmlmodule QtQuick\inherits Item

Allows dynamic loading of a subtree from a URL or Component.

Loader is used to dynamically load QML components.

Loader can load a QML file (using the \l source property) or a \l Component object (using the \l sourceComponent property). It is useful for delaying the creation of a component until it is required: for example, when a component should be created on demand, or when a component should not be created unnecessarily for performance reasons.

Here is a Loader that loads "Page1.qml" as a component when the \l MouseArea is clicked:

import QtQuick
 
Item {
    width: 200; height: 200
 
    Loader { id: pageLoader }
 
    MouseArea {
        anchors.fill: parent
        onClicked: pageLoader.source = "Page1.qml"
    }
}

The loaded object can be accessed using the \l item property.

If the \l source or \l sourceComponent changes, any previously instantiated items are destroyed. Setting \l source to an empty string or setting \l sourceComponent to undefined destroys the currently loaded object, freeing resources and leaving the Loader empty.

Definition at line 270 of file qquickloader.cpp.

◆ ~QQuickLoader()

QQuickLoader::~QQuickLoader ( )

virtual

Definition at line 276 of file qquickloader.cpp.

Member Function Documentation

◆ active()

bool QQuickLoader::active ( ) const

\qmlproperty bool QtQuick::Loader::active This property is true if the Loader is currently active.

The default value for this property is true.

If the Loader is inactive, changing the \l source or \l sourceComponent will not cause the item to be instantiated until the Loader is made active.

Setting the value to inactive will cause any \l item loaded by the loader to be released, but will not affect the \l source or \l sourceComponent.

The \l status of an inactive loader is always Null.

See also: source, sourceComponent

Definition at line 297 of file qquickloader.cpp.

◆ activeChanged

void QQuickLoader::activeChanged ( )

signal

◆ asynchronous()

bool QQuickLoader::asynchronous ( ) const

\qmlproperty bool QtQuick::Loader::asynchronous

This property holds whether the component will be instantiated asynchronously. By default it is false.

When used in conjunction with the \l source property, loading and compilation will also be performed in a background thread.

Loading asynchronously creates the objects declared by the component across multiple frames, and reduces the likelihood of glitches in animation. When loading asynchronously the status will change to Loader.Loading. Once the entire component has been created, the \l item will be available and the status will change to Loader.Ready.

Changing the value of this property to false while an asynchronous load is in progress will force immediate, synchronous completion. This allows beginning an asynchronous load and then forcing completion if the Loader content must be accessed before the asynchronous load has completed.

To avoid seeing the items loading progressively set visible appropriately, e.g.

Loader {
    source: "mycomponent.qml"
    asynchronous: true
    visible: status == Loader.Ready
}

Note that this property affects object instantiation only; it is unrelated to loading a component asynchronously via a network.

Definition at line 875 of file qquickloader.cpp.

◆ asynchronousChanged

void QQuickLoader::asynchronousChanged ( )

signal

◆ componentComplete()

void QQuickLoader::componentComplete ( )

overrideprotectedvirtual

\reimp Derived classes should call the base class method before adding their own actions to perform at componentComplete.

Reimplemented from QQuickItem.

Definition at line 786 of file qquickloader.cpp.

◆ geometryChange()

void QQuickLoader::geometryChange	(	const QRectF &	newGeometry,
		const QRectF &	oldGeometry )

overrideprotectedvirtual

Since: 6.0

This function is called to handle this item's changes in geometry from oldGeometry to newGeometry. If the two geometries are the same, it doesn't do anything.

Derived classes must call the base class method within their implementation.

Reimplemented from QQuickItem.

Definition at line 954 of file qquickloader.cpp.

◆ item()

QObject * QQuickLoader::item ( ) const

\qmlproperty QtObject QtQuick::Loader::item This property holds the top-level object that is currently loaded.

Since {QtQuick 2.0}, Loader can load any object type.

Definition at line 948 of file qquickloader.cpp.

◆ itemChange()

void QQuickLoader::itemChange	(	QQuickItem::ItemChange	change,
		const ItemChangeData &	value )

overrideprotectedvirtual

Called when change occurs for this item.

value contains extra information relating to the change, when applicable.

If you re-implement this method in a subclass, be sure to call

QQuickItem::itemChange(change, value);

QQuickItem::itemChange

virtual void itemChange(ItemChange, const ItemChangeData &)

Called when change occurs for this item.

Definition qquickitem.cpp:5846

value

EGLOutputLayerEXT EGLint EGLAttrib value

[5]

Definition qeglstreamconvenience_p.h:46

typically at the end of your implementation, to ensure the \l windowChanged() signal will be emitted.

Reimplemented from QQuickItem.

Definition at line 797 of file qquickloader.cpp.

◆ itemChanged

void QQuickLoader::itemChanged ( )

signal

◆ loaded

void QQuickLoader::loaded ( )

signal

◆ progress()

qreal QQuickLoader::progress ( ) const

\qmlsignal QtQuick::Loader::loaded()

This signal is emitted when the \l status becomes Loader.Ready, or on successful initial load.

\qmlproperty real QtQuick::Loader::progress

This property holds the progress of loading QML data from the network, from 0.0 (nothing loaded) to 1.0 (finished). Most QML files are quite small, so this value will rapidly change from 0 to 1.

See also: status

Definition at line 829 of file qquickloader.cpp.

◆ progressChanged

void QQuickLoader::progressChanged ( )

signal

◆ resetSourceComponent()

void QQuickLoader::resetSourceComponent ( )

Definition at line 458 of file qquickloader.cpp.

◆ setActive()

void QQuickLoader::setActive ( bool newVal )

Definition at line 303 of file qquickloader.cpp.

◆ setAsynchronous()

void QQuickLoader::setAsynchronous ( bool a )

Definition at line 881 of file qquickloader.cpp.

◆ setSource() [1/2]

void QQuickLoader::setSource ( const QUrl & source )

Definition at line 577 of file qquickloader.cpp.

◆ setSource() [2/2]

void QQuickLoader::setSource	(	const QUrl &	source,
		QJSValue	properties )

\qmlmethod object QtQuick::Loader::setSource(url source, object properties)

Creates an object instance of the given \a source component that will have
the given \a properties. The \a properties argument is optional.  The instance
will be accessible via the \l item property once loading and instantiation
is complete.

If the \l active property is \c false at the time when this function is called,
the given \a source component will not be loaded but the \a source and initial
\a properties will be cached.  When the loader is made \l active, an instance of
the \a source component will be created with the initial \a properties set.

Setting the initial property values of an instance of a component in this manner
will \b{not} trigger any associated \l{Behavior}s.

Note that the cached \a properties will be cleared if the \l source or \l sourceComponent
is changed after calling this function but prior to setting the loader \l active.

Example:
\table 70%
\row
\li
\qml

ExampleComponent.qml import QtQuick 2.0 Rectangle { id: rect color: "red" width: 10 height: 10

Behavior on color { NumberAnimation { target: rect property: "width" to: (rect.width + 20) duration: 0 } } } \endqml

\qml example.qml import QtQuick 2.0 Item { Loader { id: squareLoader onLoaded: console.log(squareLoader.item.width); prints [10], not [30] }

Component.onCompleted: { squareLoader.setSource("ExampleComponent.qml", { "color": "blue" }); will trigger the onLoaded code when complete. } } \endqml \endtable

See also: source, active

Definition at line 558 of file qquickloader.cpp.

◆ setSourceComponent()

void QQuickLoader::setSourceComponent ( QQmlComponent * comp )

Definition at line 441 of file qquickloader.cpp.

◆ setSourceWithoutResolve()

void QQuickLoader::setSourceWithoutResolve ( const QUrl & source )

Definition at line 370 of file qquickloader.cpp.

◆ source()

QUrl QQuickLoader::source ( ) const

\qmlproperty url QtQuick::Loader::source This property holds the URL of the QML component to instantiate.

Since {QtQuick 2.0}, Loader is able to load any type of object; it is not restricted to Item types.

To unload the currently loaded object, set this property to an empty string, or set \l sourceComponent to undefined. Setting source to a new URL will also cause the item created by the previous URL to be unloaded.

See also: sourceComponent, status, progress

Definition at line 364 of file qquickloader.cpp.

◆ sourceChanged

void QQuickLoader::sourceChanged ( )

signal

◆ sourceComponent()

QQmlComponent * QQuickLoader::sourceComponent ( ) const

\qmlproperty Component QtQuick::Loader::sourceComponent This property holds the \l{Component} to instantiate.

\qml Item { Component { id: redSquare Rectangle { color: "red"; width: 10; height: 10 } }

Loader { sourceComponent: redSquare } Loader { sourceComponent: redSquare; x: 10 } } \endqml

To unload the currently loaded object, set this property to undefined.

Since {QtQuick 2.0}, Loader is able to load any type of object; it is not restricted to Item types.

See also: source, progress

Definition at line 435 of file qquickloader.cpp.

◆ sourceComponentChanged

void QQuickLoader::sourceComponentChanged ( )

signal

◆ status()

QQuickLoader::Status QQuickLoader::status ( ) const

\qmlproperty enumeration QtQuick::Loader::status

This property holds the status of QML loading. It can be one of: \list

Loader.Null - the loader is inactive or no QML source has been set
Loader.Ready - the QML source has been loaded
Loader.Loading - the QML source is currently being loaded
Loader.Error - an error occurred while loading the QML source \endlist

Use this status to provide an update or respond to the status change in some way. For example, you could:

\list

Trigger a state change: \qml State { name: 'loaded'; when: loader.status == Loader.Ready } \endqml

Implement an onStatusChanged signal handler: \qml Loader { id: loader onStatusChanged: if (loader.status == Loader.Ready) console.log('Loaded') } \endqml

Bind to the status value: \qml Text { text: loader.status == Loader.Ready ? 'Loaded' : 'Not loaded' } \endqml \endlist

Note that if the source is a local file, the status will initially be Ready (or Error). While there will be no onStatusChanged signal in that case, the onLoaded will still be invoked.

See also: progress

Definition at line 779 of file qquickloader.cpp.

◆ statusChanged

void QQuickLoader::statusChanged ( )

signal

Property Documentation

◆ active

bool QQuickLoader::active

readwrite

Definition at line 29 of file qquickloader_p.h.

◆ asynchronous

bool QQuickLoader::asynchronous

readwrite

Definition at line 35 of file qquickloader_p.h.

◆ item

QObject * QQuickLoader::item

read

Definition at line 32 of file qquickloader_p.h.

◆ progress

qreal QQuickLoader::progress

read

Definition at line 34 of file qquickloader_p.h.

◆ source

QUrl QQuickLoader::source

readwrite

Definition at line 30 of file qquickloader_p.h.

◆ sourceComponent

QQmlComponent * QQuickLoader::sourceComponent

readwrite

Definition at line 31 of file qquickloader_p.h.

◆ status

Status QQuickLoader::status

read

Definition at line 33 of file qquickloader_p.h.

The documentation for this class was generated from the following files:

qtdeclarative/src/quick/items/qquickloader_p.h (82971e75b8e55ea14b6cbdb77ba6f280cd0c7bd5)
qtdeclarative/src/quick/items/qquickloader.cpp (2f35c7036e468d97ace2a5b3987674a30d29d532)

Public Types

Signals

Public Member Functions

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Status

Constructor & Destructor Documentation

◆ QQuickLoader()

◆ ~QQuickLoader()

Member Function Documentation

◆ active()

◆ activeChanged

◆ asynchronous()

◆ asynchronousChanged

◆ componentComplete()

◆ geometryChange()

◆ item()

◆ itemChange()

◆ itemChanged

◆ loaded

◆ progress()

◆ progressChanged

◆ resetSourceComponent()

◆ setActive()

◆ setAsynchronous()

◆ setSource() [1/2]

◆ setSource() [2/2]

◆ setSourceComponent()

◆ setSourceWithoutResolve()

◆ source()

◆ sourceChanged

◆ sourceComponent()

◆ sourceComponentChanged

◆ status()

◆ statusChanged

Property Documentation

◆ active

◆ asynchronous

◆ item

◆ progress

◆ source

◆ sourceComponent

◆ status