#include <qquickspinbox_p.h>

Inheritance diagram for QQuickSpinBox:

Collaboration diagram for QQuickSpinBox:

Public Slots
void	increase ()
	\qmlmethod void QtQuick.Controls::SpinBox::increase()
void	decrease ()
	\qmlmethod void QtQuick.Controls::SpinBox::decrease()
Public Slots inherited from QQuickItem
void	update ()
	Schedules a call to updatePaintNode() for this item.
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals
void	fromChanged ()
void	toChanged ()
void	valueChanged ()
void	stepSizeChanged ()
void	editableChanged ()
	Q_REVISION (6, 6) void liveChanged()
void	textFromValueChanged ()
void	valueFromTextChanged ()
	Q_REVISION (2, 2) void valueModified()
	Q_REVISION (2, 2) void inputMethodHintsChanged()
	Q_REVISION (2, 2) void inputMethodComposingChanged()
	Q_REVISION (2, 3) void wrapChanged()
	Q_REVISION (2, 4) void displayTextChanged()
Signals inherited from QQuickControl
void	fontChanged ()
void	availableWidthChanged ()
void	availableHeightChanged ()
void	paddingChanged ()
void	topPaddingChanged ()
void	leftPaddingChanged ()
void	rightPaddingChanged ()
void	bottomPaddingChanged ()
void	spacingChanged ()
void	localeChanged ()
void	focusReasonChanged ()
void	mirroredChanged ()
void	visualFocusChanged ()
void	hoveredChanged ()
void	hoverEnabledChanged ()
void	wheelEnabledChanged ()
void	backgroundChanged ()
void	contentItemChanged ()
void	baselineOffsetChanged ()
	Q_REVISION (2, 5) void horizontalPaddingChanged()
	Q_REVISION (2, 5) void verticalPaddingChanged()
	Q_REVISION (2, 5) void implicitContentWidthChanged()
	Q_REVISION (2, 5) void implicitContentHeightChanged()
	Q_REVISION (2, 5) void implicitBackgroundWidthChanged()
	Q_REVISION (2, 5) void implicitBackgroundHeightChanged()
	Q_REVISION (2, 5) void topInsetChanged()
	Q_REVISION (2, 5) void leftInsetChanged()
	Q_REVISION (2, 5) void rightInsetChanged()
	Q_REVISION (2, 5) void bottomInsetChanged()
Signals inherited from QQuickItem
void	childrenRectChanged (const QRectF &)
void	baselineOffsetChanged (qreal)
void	stateChanged (const QString &)
void	focusChanged (bool)
void	activeFocusChanged (bool)
Q_REVISION(6, 7) void focusPolicyChanged(Qt	Q_REVISION (2, 1) void activeFocusOnTabChanged(bool)
void	parentChanged (QQuickItem *)
void	transformOriginChanged (TransformOrigin)
void	smoothChanged (bool)
void	antialiasingChanged (bool)
void	clipChanged (bool)
	Q_REVISION (2, 1) void windowChanged(QQuickWindow *window)
void	childrenChanged ()
void	opacityChanged ()
void	enabledChanged ()
void	visibleChanged ()
void	visibleChildrenChanged ()
void	rotationChanged ()
void	scaleChanged ()
void	xChanged ()
void	yChanged ()
void	widthChanged ()
void	heightChanged ()
void	zChanged ()
void	implicitWidthChanged ()
void	implicitHeightChanged ()
	Q_REVISION (2, 11) void containmentMaskChanged()
	Q_REVISION (6, 0) void paletteChanged()
	Q_REVISION (6, 0) void paletteCreated()
Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.
void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickSpinBox (QQuickItem *parent=nullptr)
	~QQuickSpinBox ()
int	from () const
	\qmlproperty int QtQuick.Controls::SpinBox::from
void	setFrom (int from)
int	to () const
	\qmlproperty int QtQuick.Controls::SpinBox::to
void	setTo (int to)
int	value () const
	\qmlproperty int QtQuick.Controls::SpinBox::value
void	setValue (int value)
int	stepSize () const
	\qmlproperty int QtQuick.Controls::SpinBox::stepSize
void	setStepSize (int step)
bool	isEditable () const
	\qmlproperty bool QtQuick.Controls::SpinBox::editable
void	setEditable (bool editable)
bool	isLive () const
	\qmlproperty bool QtQuick.Controls::SpinBox::live
void	setLive (bool live)
QJSValue	textFromValue () const
	\qmlproperty function QtQuick.Controls::SpinBox::textFromValue
void	setTextFromValue (const QJSValue &callback)
QJSValue	valueFromText () const
	\qmlproperty function QtQuick.Controls::SpinBox::valueFromText
void	setValueFromText (const QJSValue &callback)
QQuickIndicatorButton *	up () const
	\qmlproperty bool QtQuick.Controls::SpinBox::up.pressed \qmlproperty Item QtQuick.Controls::SpinBox::up.indicator \qmlproperty bool QtQuick.Controls::SpinBox::up.hovered \qmlproperty real QtQuick.Controls::SpinBox::up.implicitIndicatorWidth \qmlproperty real QtQuick.Controls::SpinBox::up.implicitIndicatorHeight
QQuickIndicatorButton *	down () const
	\qmlproperty bool QtQuick.Controls::SpinBox::down.pressed \qmlproperty Item QtQuick.Controls::SpinBox::down.indicator \qmlproperty bool QtQuick.Controls::SpinBox::down.hovered \qmlproperty real QtQuick.Controls::SpinBox::down.implicitIndicatorWidth \qmlproperty real QtQuick.Controls::SpinBox::down.implicitIndicatorHeight
Qt::InputMethodHints	inputMethodHints () const
void	setInputMethodHints (Qt::InputMethodHints hints)
bool	isInputMethodComposing () const
bool	wrap () const
void	setWrap (bool wrap)
QString	displayText () const
Public Member Functions inherited from QQuickControl
	QQuickControl (QQuickItem *parent=nullptr)
	~QQuickControl ()
QFont	font () const
	\qmlproperty font QtQuick.Controls::Control::font
void	setFont (const QFont &font)
void	resetFont ()
qreal	availableWidth () const
	\qmlproperty real QtQuick.Controls::Control::availableWidth \readonly
qreal	availableHeight () const
	\qmlproperty real QtQuick.Controls::Control::availableHeight \readonly
qreal	padding () const
	\qmlproperty real QtQuick.Controls::Control::padding
void	setPadding (qreal padding)
void	resetPadding ()
qreal	topPadding () const
	\qmlproperty real QtQuick.Controls::Control::topPadding
void	setTopPadding (qreal padding)
void	resetTopPadding ()
qreal	leftPadding () const
	\qmlproperty real QtQuick.Controls::Control::leftPadding
void	setLeftPadding (qreal padding)
void	resetLeftPadding ()
qreal	rightPadding () const
	\qmlproperty real QtQuick.Controls::Control::rightPadding
void	setRightPadding (qreal padding)
void	resetRightPadding ()
qreal	bottomPadding () const
	\qmlproperty real QtQuick.Controls::Control::bottomPadding
void	setBottomPadding (qreal padding)
void	resetBottomPadding ()
qreal	spacing () const
	\qmlproperty real QtQuick.Controls::Control::spacing
void	setSpacing (qreal spacing)
void	resetSpacing ()
QLocale	locale () const
	\qmlproperty Locale QtQuick.Controls::Control::locale
void	setLocale (const QLocale &locale)
void	resetLocale ()
bool	isMirrored () const
	\qmlproperty bool QtQuick.Controls::Control::mirrored \readonly
Qt::FocusReason	focusReason () const
	\qmlproperty enumeration QtQuick.Controls::Control::focusReason
void	setFocusReason (Qt::FocusReason reason)
bool	hasVisualFocus () const
	\qmlproperty bool QtQuick.Controls::Control::visualFocus \readonly
bool	isHovered () const
	\qmlproperty bool QtQuick.Controls::Control::hovered \readonly
void	setHovered (bool hovered)
bool	isHoverEnabled () const
	\qmlproperty bool QtQuick.Controls::Control::hoverEnabled
void	setHoverEnabled (bool enabled)
void	resetHoverEnabled ()
bool	isWheelEnabled () const
	\qmlproperty bool QtQuick.Controls::Control::wheelEnabled
void	setWheelEnabled (bool enabled)
QQuickItem *	background () const
	\qmlproperty Item QtQuick.Controls::Control::background
void	setBackground (QQuickItem *background)
QQuickItem *	contentItem () const
	\qmlproperty Item QtQuick.Controls::Control::contentItem
void	setContentItem (QQuickItem *item)
qreal	baselineOffset () const
void	setBaselineOffset (qreal offset)
void	resetBaselineOffset ()
qreal	horizontalPadding () const
void	setHorizontalPadding (qreal padding)
void	resetHorizontalPadding ()
qreal	verticalPadding () const
void	setVerticalPadding (qreal padding)
void	resetVerticalPadding ()
qreal	implicitContentWidth () const
qreal	implicitContentHeight () const
qreal	implicitBackgroundWidth () const
qreal	implicitBackgroundHeight () const
qreal	topInset () const
void	setTopInset (qreal inset)
void	resetTopInset ()
qreal	leftInset () const
void	setLeftInset (qreal inset)
void	resetLeftInset ()
qreal	rightInset () const
void	setRightInset (qreal inset)
void	resetRightInset ()
qreal	bottomInset () const
void	setBottomInset (qreal inset)
void	resetBottomInset ()
Public Member Functions inherited from QQuickItem
	QQuickItem (QQuickItem *parent=nullptr)
	Constructs a QQuickItem with the given parent.
	~QQuickItem () override
	Destroys the QQuickItem.
QQuickWindow *	window () const
	Returns the window in which this item is rendered.
QQuickItem *	parentItem () const
void	setParentItem (QQuickItem *parent)
void	stackBefore (const QQuickItem *)
	Moves this item to the index before the specified sibling item within the list of children.
void	stackAfter (const QQuickItem *)
	Moves this item to the index after the specified sibling item within the list of children.
QRectF	childrenRect ()
	\qmlpropertygroup QtQuick::Item::childrenRect \qmlproperty real QtQuick::Item::childrenRect.x \qmlproperty real QtQuick::Item::childrenRect.y \qmlproperty real QtQuick::Item::childrenRect.width \qmlproperty real QtQuick::Item::childrenRect.height \readonly
QList< QQuickItem * >	childItems () const
	Returns the children of this item.
bool	clip () const
	\qmlproperty bool QtQuick::Item::clip This property holds whether clipping is enabled.
void	setClip (bool)
QString	state () const
	\qmlproperty string QtQuick::Item::state
void	setState (const QString &)
qreal	baselineOffset () const
	\qmlproperty int QtQuick::Item::baselineOffset
void	setBaselineOffset (qreal)
QQmlListProperty< QQuickTransform >	transform ()
qreal	x () const
qreal	y () const
QPointF	position () const
void	setX (qreal)
void	setY (qreal)
void	setPosition (const QPointF &)
QBindable< qreal >	bindableX ()
QBindable< qreal >	bindableY ()
qreal	width () const
void	setWidth (qreal)
void	resetWidth ()
void	setImplicitWidth (qreal)
qreal	implicitWidth () const
	Returns the width of the item that is implied by other properties that determine the content.
QBindable< qreal >	bindableWidth ()
qreal	height () const
void	setHeight (qreal)
void	resetHeight ()
void	setImplicitHeight (qreal)
qreal	implicitHeight () const
QBindable< qreal >	bindableHeight ()
QSizeF	size () const
void	setSize (const QSizeF &size)
TransformOrigin	transformOrigin () const
void	setTransformOrigin (TransformOrigin)
QPointF	transformOriginPoint () const
void	setTransformOriginPoint (const QPointF &)
qreal	z () const
void	setZ (qreal)
qreal	rotation () const
void	setRotation (qreal)
qreal	scale () const
void	setScale (qreal)
qreal	opacity () const
void	setOpacity (qreal)
bool	isVisible () const
void	setVisible (bool)
bool	isEnabled () const
void	setEnabled (bool)
bool	smooth () const
void	setSmooth (bool)
bool	activeFocusOnTab () const
	\qmlproperty bool QtQuick::Item::activeFocusOnTab
void	setActiveFocusOnTab (bool)
bool	antialiasing () const
void	setAntialiasing (bool)
void	resetAntialiasing ()
Flags	flags () const
	Returns the item flags for this item.
void	setFlag (Flag flag, bool enabled=true)
	Enables the specified flag for this item if enabled is true; if enabled is false, the flag is disabled.
void	setFlags (Flags flags)
	Enables the specified flags for this item.
virtual QRectF	boundingRect () const
	Returns the extents of the item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().
virtual QRectF	clipRect () const
	Returns the rectangular area within this item that is currently visible in \l viewportItem(), if there is a viewport and the \l ItemObservesViewport flag is set; otherwise, the extents of this item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().
QQuickItem *	viewportItem () const
	If the \l ItemObservesViewport flag is set, returns the nearest parent with the \l ItemIsViewport flag.
bool	hasActiveFocus () const
bool	hasFocus () const
void	setFocus (bool)
void	setFocus (bool focus, Qt::FocusReason reason)
bool	isFocusScope () const
	Returns true if this item is a focus scope, and false otherwise.
QQuickItem *	scopedFocusItem () const
	If this item is a focus scope, this returns the item in its focus chain that currently has focus.
Qt::FocusPolicy	focusPolicy () const
void	setFocusPolicy (Qt::FocusPolicy policy)
	Sets the focus policy of this item to policy.
bool	isAncestorOf (const QQuickItem *child) const
	Returns `true` if this item is an ancestor of child (i.e., if this item is child's parent, or one of child's parent's ancestors).
Qt::MouseButtons	acceptedMouseButtons () const
	Returns the mouse buttons accepted by this item.
void	setAcceptedMouseButtons (Qt::MouseButtons buttons)
	Sets the mouse buttons accepted by this item to buttons.
bool	acceptHoverEvents () const
	Returns whether hover events are accepted by this item.
void	setAcceptHoverEvents (bool enabled)
	If enabled is true, this sets the item to accept hover events; otherwise, hover events are not accepted by this item.
bool	acceptTouchEvents () const
	Returns whether touch events are accepted by this item.
void	setAcceptTouchEvents (bool accept)
	If enabled is true, this sets the item to accept touch events; otherwise, touch events are not accepted by this item.
bool	isUnderMouse () const
void	grabMouse ()
void	ungrabMouse ()
bool	keepMouseGrab () const
	Returns whether mouse input should exclusively remain with this item.
void	setKeepMouseGrab (bool)
	Sets whether the mouse input should remain exclusively with this item.
bool	filtersChildMouseEvents () const
	Returns whether pointer events intended for this item's children should be filtered through this item.
void	setFiltersChildMouseEvents (bool filter)
	Sets whether pointer events intended for this item's children should be filtered through this item.
void	grabTouchPoints (const QList< int > &ids)
void	ungrabTouchPoints ()
bool	keepTouchGrab () const
	Returns whether the touch points grabbed by this item should exclusively remain with this item.
void	setKeepTouchGrab (bool)
	Sets whether the touch points grabbed by this item should remain exclusively with this item.
	Q_REVISION (2, 4) Q_INVOKABLE bool grabToImage(const QJSValue &callback
QSharedPointer< QQuickItemGrabResult >	grabToImage (const QSize &targetSize=QSize())
	Grabs the item into an in-memory image.
virtual Q_INVOKABLE bool	contains (const QPointF &point) const
	\qmlmethod bool QtQuick::Item::contains(point point)
QObject *	containmentMask () const
void	setContainmentMask (QObject *mask)
QTransform	itemTransform (QQuickItem , bool ) const
	\qmlmethod point QtQuick::Item::mapFromItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapFromItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, rect r)
QPointF	mapToScene (const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within the scene's coordinate system, and returns the mapped coordinate.
QRectF	mapRectToItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within item's coordinate system, and returns the mapped rectangle value.
QRectF	mapRectToScene (const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within the scene's coordinate system, and returns the mapped rectangle value.
QPointF	mapFromScene (const QPointF &point) const
	Maps the given point in the scene's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.
QRectF	mapRectFromItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in item's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.
QRectF	mapRectFromScene (const QRectF &rect) const
	Maps the given rect in the scene's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.
void	polish ()
	Schedules a polish event for this item.
Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in item's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.
Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, qreal x, qreal y)
Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, const QRectF &rect) const
Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const
Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within item's coordinate system, and returns the mapped coordinate.
Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, qreal x, qreal y)
Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, const QRectF &rect) const
Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const
	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(qreal x
	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(const QPointF &point) const
	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(qreal x
	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(const QPointF &point) const
Q_INVOKABLE void	forceActiveFocus ()
	\qmlmethod point QtQuick::Item::mapToItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapToItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapToItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapToItem(Item item, rect r)
Q_INVOKABLE void	forceActiveFocus (Qt::FocusReason reason)
	\qmlmethod QtQuick::Item::forceActiveFocus(Qt::FocusReason reason) This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Forces active focus on the item with the given reason.
	Q_REVISION (2, 1) Q_INVOKABLE QQuickItem *nextItemInFocusChain(bool forward
Q_INVOKABLE QQuickItem *	childAt (qreal x, qreal y) const
	\qmlmethod Item QtQuick::Item::childAt(real x, real y)
	Q_REVISION (6, 3) Q_INVOKABLE void ensurePolished()
	Q_REVISION (6, 3) Q_INVOKABLE void dumpItemTree() const
virtual bool	isTextureProvider () const
	Returns true if this item is a texture provider.
virtual QSGTextureProvider *	textureProvider () const
	Returns the texture provider for an item.
Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.
virtual	~QObject ()
	Destroys the object, deleting all its child objects.
virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.
QString	objectName () const
Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.
void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
QBindable< QString >	bindableObjectName ()
bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.
bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.
bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.
bool	isQmlObjectType () const
	Returns whether the object has been created by the QML engine or ownership has been explicitly set via QJSEngine::setObjectOwnership().
bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.
bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
QThread *	thread () const
	Returns the thread in which the object lives.
bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.
int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)
void	killTimer (int id)
	Kills the timer with timer identifier, id.
void	killTimer (Qt::TimerId id)
template<typename T>
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
template<typename T>
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
template<typename T>
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
template<typename T>
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
const QObjectList &	children () const
	Returns a list of child objects.
void	setParent (QObject *parent)
	Makes the object a child of parent.
void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.
void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.
QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const
bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const
bool	disconnect (const QObject receiver, const char member=nullptr) const
void	dumpObjectTree () const
	Dumps a tree of children to the debug output.
void	dumpObjectInfo () const
	Dumps information about signal connections, etc.
bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.
bool	setProperty (const char *name, QVariant &&value)
QVariant	property (const char *name) const
	Returns the value of the object's name property.
QList< QByteArray >	dynamicPropertyNames () const
QBindingStorage *	bindingStorage ()
const QBindingStorage *	bindingStorage () const
QObject *	parent () const
	Returns a pointer to the parent object.
bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.
Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()
virtual	~QQmlParserStatus ()

Protected Member Functions
void	focusInEvent (QFocusEvent *event) override
	This event handler can be reimplemented in a subclass to receive focus-in events for an item.
void	hoverEnterEvent (QHoverEvent *event) override
	This event handler can be reimplemented in a subclass to receive hover-enter events for an item.
void	hoverMoveEvent (QHoverEvent *event) override
	This event handler can be reimplemented in a subclass to receive hover-move events for an item.
void	hoverLeaveEvent (QHoverEvent *event) override
	This event handler can be reimplemented in a subclass to receive hover-leave events for an item.
void	keyPressEvent (QKeyEvent *event) override
	This event handler can be reimplemented in a subclass to receive key press events for an item.
void	keyReleaseEvent (QKeyEvent *event) override
	This event handler can be reimplemented in a subclass to receive key release events for an item.
void	timerEvent (QTimerEvent *event) override
	This event handler can be reimplemented in a subclass to receive timer events for the object.
void	classBegin () override
	Invoked after class creation, but before any properties have been set.
void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.
void	itemChange (ItemChange change, const ItemChangeData &value) override
	Called when change occurs for this item.
void	contentItemChange (QQuickItem newItem, QQuickItem oldItem) override
void	localeChange (const QLocale &newLocale, const QLocale &oldLocale) override
QFont	defaultFont () const override
Protected Member Functions inherited from QQuickControl
	QQuickControl (QQuickControlPrivate &dd, QQuickItem *parent)
void	focusOutEvent (QFocusEvent *event) override
	This event handler can be reimplemented in a subclass to receive focus-out events for an item.
void	mousePressEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.
void	mouseMoveEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.
void	mouseReleaseEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.
void	mouseUngrabEvent () override
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.
void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override
virtual void	fontChange (const QFont &newFont, const QFont &oldFont)
virtual void	mirrorChange ()
virtual void	spacingChange (qreal newSpacing, qreal oldSpacing)
virtual void	paddingChange (const QMarginsF &newPadding, const QMarginsF &oldPadding)
virtual void	insetChange (const QMarginsF &newInset, const QMarginsF &oldInset)
virtual void	enabledChange ()
QString	accessibleName () const
void	maybeSetAccessibleName (const QString &name)
QVariant	accessibleProperty (const char *propertyName)
bool	setAccessibleProperty (const char *propertyName, const QVariant &value)
Protected Member Functions inherited from QQuickItem
bool	event (QEvent *) override
	\reimp
bool	isComponentComplete () const
	Returns true if construction of the QML component is complete; otherwise returns false.
bool	widthValid () const
	Returns whether the width property has been set explicitly.
bool	heightValid () const
	Returns whether the height property has been set explicitly.
void	setImplicitSize (qreal, qreal)
virtual void	mouseDoubleClickEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse double-click events for an item.
virtual void	touchUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a touch ungrab event has occurred on this item.
virtual void	touchEvent (QTouchEvent *event)
	This event handler can be reimplemented in a subclass to receive touch events for an item.
virtual bool	childMouseEventFilter (QQuickItem , QEvent )
	Reimplement this method to filter the pointer events that are received by this item's children.
virtual bool	contextMenuEvent (QContextMenuEvent *event)
virtual QSGNode *	updatePaintNode (QSGNode , UpdatePaintNodeData )
	Called on the render thread when it is time to sync the state of the item with the scene graph.
virtual void	releaseResources ()
	This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().
virtual void	updatePolish ()
	This function should perform any layout as required for this item.
	QQuickItem (QQuickItemPrivate &dd, QQuickItem *parent=nullptr)
Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.
int	senderSignalIndex () const
int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.
bool	isSignalConnected (const QMetaMethod &signal) const
virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.
virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.
virtual void	connectNotify (const QMetaMethod &signal)
virtual void	disconnectNotify (const QMetaMethod &signal)
	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
int	from
int	to
int	value
int	stepSize
bool	editable
bool	live
QJSValue	textFromValue
QJSValue	valueFromText
QQuickIndicatorButton *	up
QQuickIndicatorButton *	down
Qt::InputMethodHints	inputMethodHints
bool	inputMethodComposing
bool	wrap
QString	displayText
Properties inherited from QQuickControl
QFont	font
qreal	availableWidth
qreal	availableHeight
qreal	padding
qreal	topPadding
qreal	leftPadding
qreal	rightPadding
qreal	bottomPadding
qreal	spacing
QLocale	locale
bool	mirrored
Qt::FocusReason	focusReason
bool	visualFocus
bool	hovered
bool	hoverEnabled
bool	wheelEnabled
QQuickItem *	background
QQuickItem *	contentItem
qreal	baselineOffset
qreal	horizontalPadding
qreal	verticalPadding
qreal	implicitContentWidth
qreal	implicitContentHeight
qreal	implicitBackgroundWidth
qreal	implicitBackgroundHeight
qreal	topInset
qreal	leftInset
qreal	rightInset
qreal	bottomInset
Properties inherited from QQuickItem
QQuickItem *	parent
	\qmlproperty Item QtQuick::Item::parent This property holds the visual parent of the item.
qreal	x
	\qmlproperty real QtQuick::Item::x \qmlproperty real QtQuick::Item::y \qmlproperty real QtQuick::Item::width \qmlproperty real QtQuick::Item::height
qreal	y
	Defines the item's y position relative to its parent.
qreal	z
	\qmlproperty real QtQuick::Item::z
qreal	width
	This property holds the width of this item.
qreal	height
	This property holds the height of this item.
qreal	opacity
	\qmlproperty real QtQuick::Item::opacity
bool	enabled
	\qmlproperty bool QtQuick::Item::enabled
bool	visible
	\qmlproperty bool QtQuick::Item::visible
Qt::FocusPolicy	focusPolicy
	\qmlproperty enumeration QtQuick::Item::focusPolicy
qreal	rotation
	\qmlproperty real QtQuick::Item::rotation This property holds the rotation of the item in degrees clockwise around its transformOrigin.
qreal	scale
	\qmlproperty real QtQuick::Item::scale This property holds the scale factor for this item.
TransformOrigin	transformOrigin
	\qmlproperty enumeration QtQuick::Item::transformOrigin This property holds the origin point around which scale and rotation transform.
QPointF	transformOriginPoint
QQmlListProperty< QQuickTransform >	transform
	\qmlproperty list<Transform> QtQuick::Item::transform
bool	smooth
	\qmlproperty bool QtQuick::Item::smooth
bool	antialiasing
	\qmlproperty bool QtQuick::Item::antialiasing
qreal	implicitWidth
qreal	implicitHeight
QObject *	containmentMask
	\qmlproperty QObject* QtQuick::Item::containmentMask
Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Types inherited from QQuickItem
enum	Flag { ItemClipsChildrenToShape = 0x01 , ItemIsFocusScope = 0x04 , ItemHasContents = 0x08 , ItemAcceptsDrops = 0x10 , ItemIsViewport = 0x20 , ItemObservesViewport = 0x40 }
	\qmltype Item \nativetype QQuickItem \inherits QtObject \inqmlmodule QtQuick More...
enum	ItemChange { ItemChildAddedChange , ItemChildRemovedChange , ItemSceneChange , ItemVisibleHasChanged , ItemParentHasChanged , ItemOpacityHasChanged , ItemActiveFocusHasChanged , ItemRotationHasChanged , ItemAntialiasingHasChanged , ItemDevicePixelRatioHasChanged , ItemEnabledHasChanged , ItemScaleHasChanged , ItemTransformHasChanged }
	Used in conjunction with QQuickItem::itemChange() to notify the item about certain types of changes. More...
enum	TransformOrigin { TopLeft , Top , TopRight , Left , Center , Right , BottomLeft , Bottom , BottomRight }
	\variable QQuickItem::ItemChangeData::realValue The numeric value that has changed: \l {QQuickItem::opacity()}{opacity}, \l {QQuickItem::rotation()}{rotation}, or \l {QQuickItem::scale()}{scale}, or \l {QScreen::devicePixelRatio}{device pixel ratio}. More...
Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe
static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1, typename Func2>
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)
static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe
static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)
static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.
template<typename Func1, typename Func2>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)
template<typename Func1>
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)
Public Attributes inherited from QQuickItem
const QSize &	targetSize = QSize())
qreal y	const
Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr
Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.
template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()
template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()
	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 28 of file qquickspinbox_p.h.

Constructor & Destructor Documentation

◆ QQuickSpinBox()

QQuickSpinBox::QQuickSpinBox ( QQuickItem * parent = nullptr )

explicit

Definition at line 469 of file qquickspinbox.cpp.

◆ ~QQuickSpinBox()

QQuickSpinBox::~QQuickSpinBox ( )

Definition at line 488 of file qquickspinbox.cpp.

Member Function Documentation

◆ classBegin()

void QQuickSpinBox::classBegin ( )

overrideprotectedvirtual

Invoked after class creation, but before any properties have been set.

Reimplemented from QQuickControl.

Definition at line 1064 of file qquickspinbox.cpp.

◆ componentComplete()

void QQuickSpinBox::componentComplete ( )

overrideprotectedvirtual

Invoked after the root component that caused this instantiation has completed construction.

At this point all static values and binding values have been assigned to the class.

Reimplemented from QQuickControl.

Definition at line 1076 of file qquickspinbox.cpp.

◆ contentItemChange()

void QQuickSpinBox::contentItemChange	(	QQuickItem *	newItem,
		QQuickItem *	oldItem )

overrideprotectedvirtual

Reimplemented from QQuickControl.

Definition at line 1098 of file qquickspinbox.cpp.

◆ decrease

void QQuickSpinBox::decrease ( )

slot

\qmlmethod void QtQuick.Controls::SpinBox::decrease()

Decreases the value by \l stepSize, or 1 if stepSize is not defined.

See also: stepSize

Definition at line 952 of file qquickspinbox.cpp.

◆ defaultFont()

QFont QQuickSpinBox::defaultFont ( ) const

overrideprotectedvirtual

Reimplemented from QQuickControl.

Definition at line 1129 of file qquickspinbox.cpp.

◆ displayText()

QString QQuickSpinBox::displayText ( ) const

Since: QtQuick.Controls 2.4 (Qt 5.11) \qmlproperty string QtQuick.Controls::SpinBox::displayText \readonly

This property holds the textual value of the spinbox.

The value of the property is based on \l textFromValue and \l {Control::} {locale}, and equal to: \badcode var text = spinBox.textFromValue(spinBox.value, spinBox.locale)

See also: textFromValue

Definition at line 926 of file qquickspinbox.cpp.

◆ down()

QQuickIndicatorButton * QQuickSpinBox::down ( ) const

\qmlproperty bool QtQuick.Controls::SpinBox::down.pressed \qmlproperty Item QtQuick.Controls::SpinBox::down.indicator \qmlproperty bool QtQuick.Controls::SpinBox::down.hovered \qmlproperty real QtQuick.Controls::SpinBox::down.implicitIndicatorWidth \qmlproperty real QtQuick.Controls::SpinBox::down.implicitIndicatorHeight

These properties hold the down indicator item and whether it is pressed or hovered. The down.hovered property was introduced in QtQuick.Controls 2.1, and the down.implicitIndicatorWidth and down.implicitIndicatorHeight properties were introduced in QtQuick.Controls 2.5.

See also: decrease()

Definition at line 833 of file qquickspinbox.cpp.

◆ editableChanged

void QQuickSpinBox::editableChanged ( )

signal

◆ focusInEvent()

void QQuickSpinBox::focusInEvent ( QFocusEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive focus-in events for an item.

The event information is provided by the event parameter.

\input item.qdocinc accepting-events

If you do reimplement this function, you should call the base class implementation.

Reimplemented from QQuickControl.

Definition at line 958 of file qquickspinbox.cpp.

◆ from()

int QQuickSpinBox::from ( ) const

\qmlproperty int QtQuick.Controls::SpinBox::from

This property holds the starting value for the range. The default value is 0.

See also: to, value

Definition at line 502 of file qquickspinbox.cpp.

◆ fromChanged

void QQuickSpinBox::fromChanged ( )

signal

◆ hoverEnterEvent()

void QQuickSpinBox::hoverEnterEvent ( QHoverEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive hover-enter events for an item.

The event information is provided by the event parameter.

Hover events are only provided if acceptHoverEvents() is true.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Definition at line 968 of file qquickspinbox.cpp.

◆ hoverLeaveEvent()

void QQuickSpinBox::hoverLeaveEvent ( QHoverEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive hover-leave events for an item.

The event information is provided by the event parameter.

Hover events are only provided if acceptHoverEvents() is true.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Definition at line 984 of file qquickspinbox.cpp.

◆ hoverMoveEvent()

void QQuickSpinBox::hoverMoveEvent ( QHoverEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive hover-move events for an item.

The event information is provided by the event parameter.

Hover events are only provided if acceptHoverEvents() is true.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Definition at line 976 of file qquickspinbox.cpp.

◆ increase

void QQuickSpinBox::increase ( )

slot

\qmlmethod void QtQuick.Controls::SpinBox::increase()

Increases the value by \l stepSize, or 1 if stepSize is not defined.

See also: stepSize

Definition at line 939 of file qquickspinbox.cpp.

◆ inputMethodHints()

Qt::InputMethodHints QQuickSpinBox::inputMethodHints ( ) const

Since: QtQuick.Controls 2.2 (Qt 5.9) \qmlproperty flags QtQuick.Controls::SpinBox::inputMethodHints

This property provides hints to the input method about the expected content of the spin box and how it should operate.

The default value is Qt.ImhDigitsOnly.

Definition at line 850 of file qquickspinbox.cpp.

◆ isEditable()

bool QQuickSpinBox::isEditable ( ) const

\qmlproperty bool QtQuick.Controls::SpinBox::editable

This property holds whether the spinbox is editable. The default value is false.

See also: validator

Definition at line 600 of file qquickspinbox.cpp.

◆ isInputMethodComposing()

bool QQuickSpinBox::isInputMethodComposing ( ) const

Since: QtQuick.Controls 2.2 (Qt 5.9) \qmlproperty bool QtQuick.Controls::SpinBox::inputMethodComposing \readonly

This property holds whether an editable spin box has partial text input from an input method.

While it is composing, an input method may rely on mouse or key events from the spin box to edit or commit the partial text. This property can be used to determine when to disable event handlers that may interfere with the correct operation of an input method.

Definition at line 877 of file qquickspinbox.cpp.

◆ isLive()

bool QQuickSpinBox::isLive ( ) const

\qmlproperty bool QtQuick.Controls::SpinBox::live

Since: 6.6

This property holds whether the \l value is updated when the user edits the \l displayText. The default value is false. If this property is true and the value entered by the user is valid and within the bounds of the spinbox [\l from, \l to], the value of the SpinBox will be set. If this property is false or the value entered by the user is outside the boundaries, the value will not be updated until the enter or return keys are pressed, or the input field loses focus.

See also: editable, displayText

Definition at line 640 of file qquickspinbox.cpp.

◆ itemChange()

void QQuickSpinBox::itemChange	(	ItemChange	change,
		const ItemChangeData &	value )

overrideprotectedvirtual

Called when change occurs for this item.

value contains extra information relating to the change, when applicable.

If you re-implement this method in a subclass, be sure to call

QQuickItem::itemChange(change, value);

QQuickItem::itemChange

virtual void itemChange(ItemChange, const ItemChangeData &)

Called when change occurs for this item.

Definition qquickitem.cpp:5867

QQuickSpinBox::value

int value

Definition qquickspinbox_p.h:33

typically at the end of your implementation, to ensure the \l windowChanged() signal will be emitted.

Reimplemented from QQuickControl.

Definition at line 1090 of file qquickspinbox.cpp.

◆ keyPressEvent()

void QQuickSpinBox::keyPressEvent ( QKeyEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive key press events for an item.

The event information is provided by the event parameter.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Definition at line 993 of file qquickspinbox.cpp.

◆ keyReleaseEvent()

void QQuickSpinBox::keyReleaseEvent ( QKeyEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive key release events for an item.

The event information is provided by the event parameter.

\input item.qdocinc accepting-events

Reimplemented from QQuickItem.

Definition at line 1024 of file qquickspinbox.cpp.

◆ localeChange()

void QQuickSpinBox::localeChange	(	const QLocale &	newLocale,
		const QLocale &	oldLocale )

overrideprotectedvirtual

Reimplemented from QQuickControl.

Definition at line 1122 of file qquickspinbox.cpp.

◆ Q_REVISION [1/6]

QQuickSpinBox::Q_REVISION	(	2	,
		2	)

signal

◆ Q_REVISION [2/6]

QQuickSpinBox::Q_REVISION	(	2	,
		2	)

signal

◆ Q_REVISION [3/6]

QQuickSpinBox::Q_REVISION	(	2	,
		2	)

signal

◆ Q_REVISION [4/6]

QQuickSpinBox::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [5/6]

QQuickSpinBox::Q_REVISION	(	2	,
		4	)

signal

◆ Q_REVISION [6/6]

QQuickSpinBox::Q_REVISION	(	6	,
		6	)

signal

◆ setEditable()

void QQuickSpinBox::setEditable ( bool editable )

Definition at line 606 of file qquickspinbox.cpp.

◆ setFrom()

void QQuickSpinBox::setFrom ( int from )

Definition at line 508 of file qquickspinbox.cpp.

◆ setInputMethodHints()

void QQuickSpinBox::setInputMethodHints ( Qt::InputMethodHints hints )

Definition at line 856 of file qquickspinbox.cpp.

◆ setLive()

void QQuickSpinBox::setLive ( bool live )

Definition at line 646 of file qquickspinbox.cpp.

◆ setStepSize()

void QQuickSpinBox::setStepSize ( int step )

Definition at line 583 of file qquickspinbox.cpp.

◆ setTextFromValue()

void QQuickSpinBox::setTextFromValue ( const QJSValue & callback )

Definition at line 740 of file qquickspinbox.cpp.

◆ setTo()

void QQuickSpinBox::setTo ( int to )

Definition at line 537 of file qquickspinbox.cpp.

◆ setValue()

void QQuickSpinBox::setValue ( int value )

Definition at line 564 of file qquickspinbox.cpp.

◆ setValueFromText()

void QQuickSpinBox::setValueFromText ( const QJSValue & callback )

Definition at line 788 of file qquickspinbox.cpp.

◆ setWrap()

void QQuickSpinBox::setWrap ( bool wrap )

Definition at line 897 of file qquickspinbox.cpp.

◆ stepSize()

int QQuickSpinBox::stepSize ( ) const

\qmlproperty int QtQuick.Controls::SpinBox::stepSize

This property holds the step size. The default value is 1.

See also: increase(), decrease()

Definition at line 577 of file qquickspinbox.cpp.

◆ stepSizeChanged

void QQuickSpinBox::stepSizeChanged ( )

signal

◆ textFromValue()

QJSValue QQuickSpinBox::textFromValue ( ) const

\qmlproperty function QtQuick.Controls::SpinBox::textFromValue

This property holds a callback function that is called whenever an integer value needs to be converted to display text.

The default function can be overridden to display custom text for a given value. This applies to both editable and non-editable spinboxes; for example, when using the up and down buttons or a mouse wheel to increment and decrement the value, the new value is converted to display text using this function.

The callback function signature is {string function(value, locale)}. The function can have one or two arguments, where the first argument is the value to be converted, and the optional second argument is the locale that should be used for the conversion, if applicable.

The default implementation does the conversion using \l {QtQml::Number::toLocaleString()}{Number.toLocaleString}():

textFromValue: function(value, locale) { return Number(value).toLocaleString(locale, 'f', 0); }

CFX_CSSVerticalAlign::Number

@ Number

Definition cfx_css.h:79

QQuickControl::locale

QLocale locale

Definition qquickcontrol_p.h:44

QQuickSpinBox::textFromValue

QJSValue textFromValue

Definition qquickspinbox_p.h:41

function

DBusConnection const char DBusError DBusBusType DBusError return DBusConnection DBusHandleMessageFunction function

[0]

Definition qdbus_symbols_p.h:179

Note: When applying a custom textFromValue implementation for editable spinboxes, a matching \l valueFromText implementation must be provided to be able to convert the custom text back to an integer value.

See also: valueFromText, validator, {Control::locale}{locale}

Definition at line 729 of file qquickspinbox.cpp.

◆ textFromValueChanged

void QQuickSpinBox::textFromValueChanged ( )

signal

◆ timerEvent()

void QQuickSpinBox::timerEvent ( QTimerEvent * event )

overrideprotectedvirtual

This event handler can be reimplemented in a subclass to receive timer events for the object.

QChronoTimer provides higher-level interfaces to the timer functionality, and also more general information about timers. The timer event is passed in the event parameter.

See also: startTimer(), killTimer(), event()

Reimplemented from QObject.

Definition at line 1037 of file qquickspinbox.cpp.

◆ to()

int QQuickSpinBox::to ( ) const

\qmlproperty int QtQuick.Controls::SpinBox::to

This property holds the end value for the range. The default value is 99.

See also: from, value

Definition at line 531 of file qquickspinbox.cpp.

◆ toChanged

void QQuickSpinBox::toChanged ( )

signal

◆ up()

QQuickIndicatorButton * QQuickSpinBox::up ( ) const

\qmlproperty bool QtQuick.Controls::SpinBox::up.pressed \qmlproperty Item QtQuick.Controls::SpinBox::up.indicator \qmlproperty bool QtQuick.Controls::SpinBox::up.hovered \qmlproperty real QtQuick.Controls::SpinBox::up.implicitIndicatorWidth \qmlproperty real QtQuick.Controls::SpinBox::up.implicitIndicatorHeight

These properties hold the up indicator item and whether it is pressed or hovered. The up.hovered property was introduced in QtQuick.Controls 2.1, and the up.implicitIndicatorWidth and up.implicitIndicatorHeight properties were introduced in QtQuick.Controls 2.5.

See also: increase()

Definition at line 813 of file qquickspinbox.cpp.

◆ value()

int QQuickSpinBox::value ( ) const

\qmlproperty int QtQuick.Controls::SpinBox::value

This property holds the value in the range from - to. The default value is 0.

Definition at line 558 of file qquickspinbox.cpp.

◆ valueChanged

void QQuickSpinBox::valueChanged ( )

signal

◆ valueFromText()

QJSValue QQuickSpinBox::valueFromText ( ) const

\qmlproperty function QtQuick.Controls::SpinBox::valueFromText

This property holds a callback function that is called whenever input text needs to be converted to an integer value.

This function only needs to be overridden when \l textFromValue is overridden for an editable spinbox.

The callback function signature is {int function(text, locale)}. The function can have one or two arguments, where the first argument is the text to be converted, and the optional second argument is the locale that should be used for the conversion, if applicable.

The default implementation does the conversion using \l {QtQml::Locale}{Number.fromLocaleString()}:

valueFromText: function(text, locale) { return Number.fromLocaleString(locale, text); }

QQuickSpinBox::valueFromText

QJSValue valueFromText

Definition qquickspinbox_p.h:42

Note: When applying a custom \l textFromValue implementation for editable spinboxes, a matching valueFromText implementation must be provided to be able to convert the custom text back to an integer value.

See also: textFromValue, validator, {Control::locale}{locale}

Definition at line 777 of file qquickspinbox.cpp.

◆ valueFromTextChanged

void QQuickSpinBox::valueFromTextChanged ( )

signal

◆ wrap()

bool QQuickSpinBox::wrap ( ) const

Since: QtQuick.Controls 2.3 (Qt 5.10) \qmlproperty bool QtQuick.Controls::SpinBox::wrap

This property holds whether the spinbox wraps. The default value is false.

If wrap is true, stepping past \l to changes the value to \l from and vice versa.

Definition at line 891 of file qquickspinbox.cpp.

Property Documentation

◆ displayText

QString QQuickSpinBox::displayText

read

Definition at line 51 of file qquickspinbox_p.h.

◆ down

QQuickIndicatorButton * QQuickSpinBox::down

read

Definition at line 44 of file qquickspinbox_p.h.

◆ editable

bool QQuickSpinBox::editable

readwrite

Definition at line 35 of file qquickspinbox_p.h.

◆ from

int QQuickSpinBox::from

readwrite

Definition at line 31 of file qquickspinbox_p.h.

◆ inputMethodComposing

bool QQuickSpinBox::inputMethodComposing

read

Definition at line 47 of file qquickspinbox_p.h.

◆ inputMethodHints

Qt::InputMethodHints QQuickSpinBox::inputMethodHints

readwrite

Definition at line 46 of file qquickspinbox_p.h.

◆ live

bool QQuickSpinBox::live

readwrite

Definition at line 36 of file qquickspinbox_p.h.

◆ stepSize

int QQuickSpinBox::stepSize

readwrite

Definition at line 34 of file qquickspinbox_p.h.

◆ textFromValue

QJSValue QQuickSpinBox::textFromValue

readwrite

Definition at line 41 of file qquickspinbox_p.h.

◆ to

int QQuickSpinBox::to

readwrite

Definition at line 32 of file qquickspinbox_p.h.

◆ up

QQuickIndicatorButton * QQuickSpinBox::up

read

Definition at line 43 of file qquickspinbox_p.h.

◆ value

int QQuickSpinBox::value

readwrite

Definition at line 33 of file qquickspinbox_p.h.

◆ valueFromText

QJSValue QQuickSpinBox::valueFromText

readwrite

Definition at line 42 of file qquickspinbox_p.h.

◆ wrap

bool QQuickSpinBox::wrap

readwrite

Definition at line 49 of file qquickspinbox_p.h.

The documentation for this class was generated from the following files:

qtdeclarative/src/quicktemplates/qquickspinbox_p.h (01cd43d30e3ca2c4dd94a4a4711604adb9417517)
qtdeclarative/src/quicktemplates/qquickspinbox.cpp (a92b696b7017b00ac94e8d94597efd9e979aeacb)

Public Slots

Signals

Public Member Functions

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ QQuickSpinBox()

◆ ~QQuickSpinBox()

Member Function Documentation

◆ classBegin()

◆ componentComplete()

◆ contentItemChange()

◆ decrease

◆ defaultFont()

◆ displayText()

◆ down()

◆ editableChanged

◆ focusInEvent()

◆ from()

◆ fromChanged

◆ hoverEnterEvent()

◆ hoverLeaveEvent()

◆ hoverMoveEvent()

◆ increase

◆ inputMethodHints()

◆ isEditable()

◆ isInputMethodComposing()

◆ isLive()

◆ itemChange()

◆ keyPressEvent()

◆ keyReleaseEvent()

◆ localeChange()

◆ Q_REVISION [1/6]

◆ Q_REVISION [2/6]

◆ Q_REVISION [3/6]

◆ Q_REVISION [4/6]

◆ Q_REVISION [5/6]

◆ Q_REVISION [6/6]

◆ setEditable()

◆ setFrom()

◆ setInputMethodHints()

◆ setLive()

◆ setStepSize()

◆ setTextFromValue()

◆ setTo()

◆ setValue()

◆ setValueFromText()

◆ setWrap()

◆ stepSize()

◆ stepSizeChanged

◆ textFromValue()

◆ textFromValueChanged

◆ timerEvent()

◆ to()

◆ toChanged

◆ up()

◆ value()

◆ valueChanged

◆ valueFromText()

◆ valueFromTextChanged

◆ wrap()

Property Documentation

◆ displayText

◆ down

◆ editable

◆ from

◆ inputMethodComposing

◆ inputMethodHints

◆ live

◆ stepSize

◆ textFromValue

◆ to

◆ up

◆ value

◆ valueFromText

◆ wrap